June 16–18, 2026 · Shanghai New International Expo Centre (SNIEC) · Hall W10, Booth C37
SINOTHERMO will exhibit at the 19th CPHI & PMEC China. If you are sourcing drying, granulation or coating equipment for pharmaceutical solids and APIs, we would like to meet you at Booth W10C37 in Hall W10.
We take a process engineering approach: our job is to solve your powder-processing problem, not simply hand you a standard machine. With 20+ years of in-house R&D, design, manufacturing and service — and ISO 9001:2015 certification — we build equipment around your formulation, capacity and compliance requirements.
What you’ll see at our booth
We’ll present scaled display units of three of our most requested systems:
- Santrifüj Sprey Kurutucu — a high-speed centrifugal atomizer turns solutions, emulsions and suspensions into fine droplets that dry in seconds against hot air. Ideal when particle size, residual moisture (typ. 3–5%), bulk density and shape must meet precise standards. Inlet air range 150–500°C.
- Islak Hızlı Karıştırma Granülatörü — a bottom impeller mixes powder and binder into a wet mass; a side chopper cuts it into uniform granules and prevents clumping. Mixing and granulation in minutes; optional jacket for heating/cooling.
- Wurster Akışkan Yataklı Granülasyon Kaplayıcı — mixing, granulating, coating and drying in one platform. Top nozzles granulate the fluidized bed; bottom/side nozzles coat the granules.
We’ll also be glad to discuss our Statik Vakumlu Kabin Kurutucu for low-temperature, gentle drying (heat source <100°C) of heat-sensitive, flammable or solvent-laden materials.
Why talk to SINOTHERMO
- Highly customized — engineered to your process, not off-the-shelf.
- In-house pilot laboratory — validate your process on our equipment before you commit.
- Track record — serving 300+ industries with 5,000+ delivered projects and 15,000+ units built.
- We’re close by. Our factory and pilot lab in Changzhou, Jiangsu are about 1.5 hours from Shanghai by high-speed rail.
See the machine, then run your material
A booth can only show you so much. The real advantage of meeting us here: after the show, come straight to our Changzhou pilot lab and run a trial with your own material on full-scale equipment. A handshake at the booth, a trial the same week.
📍 Booth W10C37 · Hall W10 · SNIEC, Shanghai ｜ 📅 June 16–18, 2026
✉️ info@sinothermo.com
📱 +86 400 825 1228
🌐 www.sinothermo.com
