Sürekli Kurutma
Sürekli Kurutma, malzemeyi kesintisiz bir akış halinde işleyen SINOTHERMO'nun sprey, flash, akışkan yataklı, bantlı, döner fırın ve vakumlu-iletimli kurutucularını kapsar. Bu sistem, kesikli üretimin gerektirdiği yükleme-boşaltma duruş sürelerinden ziyade, üretim programlarına uygun, istikrarlı ve yüksek hacimli bir kapasite sağlar.
CD Kurutucu
Kategoriler: İletim ve Vakum Kurutucu
Continuous Drying for Liquid and Paste-like Materials:
The CD Dryer is designed for continuous drying of liquids and pastes. Utilizing indirectly heated discs, the dryer efficiently transfers heat to the material, creating a thin layer for rapid evaporation. This method ensures effective drying and consistent product quality.
- Input:
- Liquid and Pasty Materials
- Output:
- Dried Solids (flake or powder, depending on application)
- Heat Transfer Coefficient:
- Overall heat transfer coefficient: 2,300W/m²k
- Thermal Efficiency:
- 80 to 85% thermal efficiency
LPG-Santrifüj Sprey Kurutucu
Kategoriler: Konveksiyon Kurutucu, Sprey Kurutucu
Advanced Liquid-to-Powder Process:
A high-speed centrifugal atomizer at the tower's peak transforms materials into super fine liquid drops that dry quickly upon contact with hot air — perfect for precise particle size, moisture, density and shape standards.
- Input:
- Solutions, Emulsions, Suspensions
- Output:
- Powder with 3%-5% moisture content
- Temperature:
- Inlet air temperature range of 150°C to 500°C
YPG-Basınçlı Sprey Kurutucu
Kategoriler: Konveksiyon Kurutucu, Sprey Kurutucu
High-Pressure Nozzle Atomization:
The Pressure Spray Dryer atomizes feed liquid through high-pressure nozzles, producing coarser and denser granules with excellent flowability — widely used for foods, chemicals and dairy powders.
- Input:
- Solutions, Emulsions, Suspensions
- Output:
- Coarse powder or granules with 3%-5% moisture content
- Temperature:
- Inlet air temperature range of 150°C to 350°C
XSG-Spin Flash Kurutucu
Kategoriler: Konveksiyon Kurutucu, Flash Kurutucu
One-Step Continuous Flash Drying:
The Spin Flash Dryer dries pastes and filter cakes in a single continuous step. Hot air and mechanical agitation break up material while drying — no pre-crushing needed.
- Input:
- Pastes, Filter Cakes, Thick Slurries
- Output:
- Powder with 3%-8% moisture content
- Temperature:
- Inlet air temperature range of 150°C to 350°C
PLG-Vakumlu Dikey Plakalı Kurutucu
Kategoriler: İletim ve Vakum Kurutucu
Effective Continuous Vacuum Conduction Dryer:
The Vacuum Plate Dryer incorporates discs for efficient heating, providing a generous heating surface in a compact layout. It excels in vacuum operations, ideal for managing flammable, explosive and heat-sensitive materials.
- Input:
- Loose powder, Granules
- Output:
- Powder, Granules with 3%-8% moisture content
- Temperature:
- Heat source temperature <200°C
DW-Bantlı Kurutucu
Kategoriler: Konveksiyon Kurutucu
Continuous Convection Dryer with Mesh Belt:
The Belt Dryer can be configured with single or multiple mesh-belt layers, spreading material evenly for directional hot-air drying. Belt speed adjusts to each material's temperature and moisture content, so it runs at comparatively low temperatures while continuously processing large batches.
- Input:
- Permeable solids in sheets, strips, granules or blocks
- Output:
- Sheet, strip, granule or block solids with 3%–8% moisture content
- Temperature:
- Inlet air temperature < 200°C
- Additional Feature:
- Cooling
ZLG-Yatay Titreşimli Akışkanlaştırılmış Yatak Kurutucu
Kategoriler: Konveksiyon Kurutucu, Akışkanlaştırılmış Yatak Kurutucu, Titreşimli Kurutucu
Continuous Drying Solution for Granular Materials:
Operating on the principle of fluidization combined with vibration, the Vibrating Fluid Bed Dryer processes granules by circulating them on heated air that dries them evenly. This approach minimizes surface damage, prevents pollution thanks to its enclosed design, and gives granules time to settle — facilitating stable, continuous production.
- Input:
- Granules with moisture content < 20%
- Output:
- Granules with 1%–5% moisture content
- Temperature:
- Inlet air temperature < 200°C
- Additional Feature:
- Cooling
HZG-Döner Fırın
Kategoriler: Konveksiyon Kurutucu
Perfect for Large-Scale, Continuous Drying:
Wet material enters at one end of the Rotary Kiln, where internal flights agitate it and blend it thoroughly with hot air. This elongated drum dryer, spanning many metres, can process hundreds of tons per hour, and its drum speed adjusts from 1 to 10 RPM to suit different requirements.
- Input:
- Granular materials
- Output:
- Granules with 3%–5% moisture content
- Temperature:
- Inlet air temperature range of 40°C to 350°C
- Additional Feature:
- Mixing
HG/GT-Vakumlu Tamburlu Kazıyıcılı Kurutucu
Kategoriler: İletim ve Vakum Kurutucu
Continuous Drying for Paste-like Materials:
In operation, the rotating drum picks up material as a thin film. Heat transfers from the inner to the outer wall, effectively evaporating moisture, while an internal scraper continuously converts the dried film into flake-like product in a short time.
- Input:
- Pasty, Viscous and Thick Materials
- Output:
- Flake-like Solids with 5%–8% moisture content
- Temperature:
- Inlet air temperature range of 120°C to 260°C
- Additional Feature:
- Cooling
GXP-Kapalı Devre Sprey Kurutucu
Kategoriler: Konveksiyon Kurutucu, Sprey Kurutucu
Optimal Drying for Sensitive Materials:
This explosion-proof spray dryer operates in a sealed environment, using inert gas as the drying medium to fully recover solvents from raw materials. The recyclable drying medium provides superior protection for sensitive materials.
- Input:
- Solutions, Emulsions, Suspensions
- Output:
- Powder with 3%–8% moisture content
- Temperature:
- Inlet air temperature range of 100°C to 300°C
- Suitability:
- Anaerobic, explosion-proof and low-temperature conditions
ZLPG-Ekstrakt Sprey Kurutucu
Kategoriler: Konveksiyon Kurutucu, Sprey Kurutucu
Specialized Spray Dryer for Extracts:
The Extract Spray Dryer features a cylinder equipped with a cooling system specifically designed for drying extracts while keeping wall temperatures below 80°C. It includes an airbrush that cleans the walls during operation to prevent adhesion and protect the powder from burning.
- Input:
- Extracts (Liquid)
- Output:
- Extracts (Powder) with 3%–8% moisture content
- Temperature:
- Inlet air temperature range of 140°C to 180°C
- Additional Features:
- Freeze dehumidification, Air brush for tower cleaning
Pnömatik Flash Kurutucu
Kategoriler: Konveksiyon Kurutucu, Flash Kurutucu
Integrated Handling for Heat-Sensitive, Loose Solid Materials:
Designed for temperature-sensitive and slightly viscous materials, this equipment offers a wide range of uses for loose solid materials. Its modular design allows drying and grinding stages to be added to meet varying customer requirements.
- Input:
- Non-viscous, loose solid materials
- Output:
- Powder, granules, with 3%–6% moisture content
- Temperature:
- Inlet temperature < 200°C
- Additional Feature:
- Grinding
XF-Yatay Akışkanlaştırılmış Yatak Kurutucu
Kategoriler: Konveksiyon Kurutucu, Akışkanlaştırılmış Yatak Kurutucu
Versatile Continuous Drying for Granules and Powder:
The Horizontal Fluidized Bed Dryer aerates damp materials with an upward air stream to dry or cool them. Built for continuous manufacturing, it offers residence times from a few seconds to minutes, ensuring effective processing.
- Input:
- Powders and Granules, moisture < 20%
- Output:
- Powders and Granules, moisture 3%–5%
- Temperature:
- Inlet air temperature < 100°C
- Additional Feature:
- Cooling
LZG-Spiral Titreşimli Kurutucu
Kategoriler: Konveksiyon Kurutucu, Titreşimli Kurutucu
Method for Drying Pellets and Granules:
The Spiral Vibrating Dryer dries materials by using centrifugal vibration and gravity to move them in a bouncing path from top to bottom along a spiral bed. Fresh hot air enters from below, interacting thoroughly with the material for heat and mass transfer before leaving through the top — ensuring even drying.
- Input:
- Granular, short-rod and spherical solids with < 20% moisture
- Output:
- Granules, short rods and spheres with 3%–5% moisture
- Temperature:
- Inlet air temperature < 100°C
- Additional Feature:
- Cooling
Farklı Besleme Tiplerine Uygun Sürekli Tasarımlar
Sprey kurutucular (LPG, YPG, GXP, ZLPG) sıvı beslemeyi sürekli olarak atomize ederek toz haline getirir; flash kurutucular (XSG, Pnömatik) ıslak keki sıcak hava içinden sürekli olarak taşır; akışkan yataklı (XF, ZLG) ve bantlı (DW) kurutucular granül ve dökme malzemeyi sürekli olarak hareket ettirir; döner fırın (HZG) ve vakumlu-iletimli üniteler (CD, PLG, HG/GT, ZYG) dökme katıların ve macunların sürekli işlenmesini sağlar.
Üreticiler Neden Kesikliye Karşı Sürekli Kurutmayı Tercih Eder
İstikrarlı kapasite, parti-parti arası duruş süresi olmadan yüksek hacimli üretim programlarına uyum sağlar. Tutarlı bekleme süresi, tüm üretim boyunca daha homojen bir nem içeriği sunar. Çıktı birimi başına, kesikli partileri yükleyip boşaltmaya kıyasla daha düşük işçilik maliyeti sağlar.
Daha Fazla Keşfet
Convective Drying →
Birçok sürekli kurutucu türünün temelini oluşturan doğrudan sıcak hava temasıyla kurutma prensibi.
Cooling →
Sürekli kurutmadan sonra ürünü işleme sıcaklığına getirmek için sıkça uygulanan bir sonraki aşama.
Conduction Drying →
Bazı sürekli konfigürasyonlarda mevcut olan, temas yoluyla ısı transferine dayanan alternatif yöntem.
