FLP-Wurster 유동층 조립 코팅기
카테고리: 조립기 및 압출기, 유동층 과립기
All-in-One Mixing, Granulating, Coating, and Drying:
After the main material forms a fluidized bed at the bottom, granules are created with the aid of adhesive sprayed from the top nozzles in the granulating chamber. Subsequently, coating material is sprayed onto the granules from bottom or side nozzles within the chamber for effective coating.
- Input:
- Main ingredient as powder (for granulation) or granules and pellets (for coating), with adhesive or coating material in liquid form
- Output:
- Solid medium-sized granules with 3%–5% moisture content
- Type:
- Spray Fluidized Bed, Wet Granulation
- Additional Features:
- Mixing, Coating, Drying, Cooling
SET-스크류 압출식 과립기
카테고리: 조립기 및 압출기
Wet Granulation with Screw Extrusion Process:
By utilizing an extrusion process, this wet-granulation machine leverages the self-viscosity of a solid-liquid dispersion to bond powder particles, producing granules of consistent shape and size. The screw-extrusion mechanism generates enough force to form pellets without always requiring a binder — particularly suitable for high-viscosity materials. Optional water cooling is available.
- Input:
- Solid-liquid mixture (predominantly solid)
- Output:
- Moist cylindrical granules
- Type:
- Extrusion Granulation, Wet Granulation
GHL-습식 고속 혼합 과립기
카테고리: 조립기 및 압출기
Cutting-Edge Wet Granulation Technology:
A paddle at the base swiftly mixes powders and sticky binders within a cylindrical bowl, while a rapid chopper on the side breaks the mixture into wet granules to prevent clumping. This fast process combines mixing and granule formation within minutes, and the Wet Rapid Mixing Granulator can provide heating or cooling as needed.
- Input:
- Main material in powder form, binding agent as paste
- Output:
- Solid, loose granules with approximately 15% moisture content
- Type:
- Mixing Granulation, Wet Granulation
- Additional Features:
- Mixing, Mild Crushing, Heating, Cooling
FL-유동층 과립기
카테고리: 조립기 및 압출기, 유동층 과립기
All-in-One Mixing, Granulating, and Drying:
Materials form a fluidized bed at the bottom, where granules are created in the granulation chamber with the help of spray nozzles dispensing binder. The hopper allows several raw materials to be added and mixed during the fluidization process.
- Input:
- Main ingredient as powder, adhesive in liquid form
- Output:
- Solid medium-sized granules with 3%–5% moisture content
- Type:
- Spray Fluidized Bed, Wet Granulation
- Additional Features:
- Mixing, Drying, Cooling
PGL-유동층 분무 과립기
카테고리: 조립기 및 압출기, 유동층 과립기
Combines Mixing, Granulating and Drying for High-Excipient Granulation:
Excipient-rich granulation finds an ideal match in this unit. Excipients in the hopper form a fluidized bed that acts as seeds or carriers, while the main material — typically a liquid extract making up a smaller proportion of the batch — is sprayed from above and merges at the bed's edge for granulation. This method is particularly suited to heat-sensitive materials.
- Input:
- Carrier materials in powder form, main material in liquid form
- Output:
- Solid medium-sized granules, 3%–5% moisture content
- Type:
- Spray Fluidized Bed, Wet Granulation
- Additional Features:
- Mixing, Drying, Cooling
YK-진동식 과립기
카테고리: 조립기 및 압출기
Efficient, Versatile Oscillating Granulator:
The Oscillating Granulator uses a special back-and-forth motion to softly turn moist powder into even, round granules. Variable oscillation frequency and amplitude allow precise control of particle size and density, in a compact design with simple operation and low maintenance requirements.
- Input:
- Moist powder mixed with a binder
- Output:
- Wet cylindrical granules
- Type:
- Dry Granulation, Wet Granulation
- Additional Feature:
- Mixing
ZLB-바스켓 과립기
카테고리: 조립기 및 압출기
Efficient Wet Extrusion Granulator:
Moist powder is pushed through a mesh by rotating blades during extrusion to form quality granules. The Basket Granulator offers steady granulation rates, visually appealing particles, an automated discharge process and high output levels.
- Input:
- Moist powder mixed with a binder
- Output:
- Wet cylindrical granules
- Type:
- Extrusion Granulation, Wet Granulation
- Additional Feature:
- Mixing
GKDH-건식 압축 과립기
카테고리: 조립기 및 압출기
Additive-Free Dry Granulation Process:
Dry raw materials are compressed under pressure to form solid flakes, which are then processed into granules of the desired size — forming granules through pressure alone, with no liquid binder or added moisture.
- Input:
- Powder
- Output:
- Solid Granules
- Type:
- Dry Granulation
- Additional Features:
- Crushing, Screening
습식, 건식 및 유동층 조립을 하나의 라인업으로
SINOTHERMO의 과립기 라인업은 습식 공정용 Wurster 유동층 코팅, 스크류 압출, 습식 고속 혼합, 유동층 조립 및 분무 조립과, 건식 공정용 진동식, 바스켓 및 건식 압축 과립기를 포함하여 정제, 인스턴트 파우더, 엔지니어드 입자 전반을 아우릅니다.
습식 대 건식 조립 경로
습식 조립은 액체로 분말을 결합합니다: 고속 혼합(GHL)이 습윤 매스를 형성하고, 이어서 압출(SET) 또는 유동층 분무(FL, PGL)가 한 번의 공정으로 과립을 성형 및 건조하며, Wurster 코팅(FLP)은 입자 표면에 코팅층을 형성합니다. 건식 조립은 추가 액체 없이 분말을 압축합니다: 진동식(YK) 및 바스켓(ZLB) 과립기는 건조 케이크를 과립으로 분쇄하고, 건식 압축(GKDH)은 롤러로 미세 분말을 직접 과립으로 압축하여 수분에 민감한 제제에 적합합니다.
