냉각
냉각은 건조 또는 조립된 제품을 안전한 취급 또는 보관 온도까지 낮추는 데 사용되는 SINOTHERMO의 유동층 및 진동식 장비를 포함합니다. 건조 또는 조립 직후의 정밀한 냉각은 포장 전에 구조와 수분 평형을 안정화시키며, 건조와 동일한 공기 접촉 원리를 사용합니다.
DW-벨트 건조기
카테고리: 대류 건조기
Continuous Convection Dryer with Mesh Belt:
The Belt Dryer can be configured with single or multiple mesh-belt layers, spreading material evenly for directional hot-air drying. Belt speed adjusts to each material's temperature and moisture content, so it runs at comparatively low temperatures while continuously processing large batches.
- Input:
- Permeable solids in sheets, strips, granules or blocks
- Output:
- Sheet, strip, granule or block solids with 3%–8% moisture content
- Temperature:
- Inlet air temperature < 200°C
- Additional Feature:
- Cooling
FLP-Wurster 유동층 조립 코팅기
카테고리: 조립기 및 압출기, 유동층 과립기
All-in-One Mixing, Granulating, Coating, and Drying:
After the main material forms a fluidized bed at the bottom, granules are created with the aid of adhesive sprayed from the top nozzles in the granulating chamber. Subsequently, coating material is sprayed onto the granules from bottom or side nozzles within the chamber for effective coating.
- Input:
- Main ingredient as powder (for granulation) or granules and pellets (for coating), with adhesive or coating material in liquid form
- Output:
- Solid medium-sized granules with 3%–5% moisture content
- Type:
- Spray Fluidized Bed, Wet Granulation
- Additional Features:
- Mixing, Coating, Drying, Cooling
ZLG-수평형 진동식 유동층 건조기
카테고리: 대류 건조기, 유동층 건조기, 진동식 건조기
Continuous Drying Solution for Granular Materials:
Operating on the principle of fluidization combined with vibration, the Vibrating Fluid Bed Dryer processes granules by circulating them on heated air that dries them evenly. This approach minimizes surface damage, prevents pollution thanks to its enclosed design, and gives granules time to settle — facilitating stable, continuous production.
- Input:
- Granules with moisture content < 20%
- Output:
- Granules with 1%–5% moisture content
- Temperature:
- Inlet air temperature < 200°C
- Additional Feature:
- Cooling
GHL-습식 고속 혼합 과립기
카테고리: 조립기 및 압출기
Cutting-Edge Wet Granulation Technology:
A paddle at the base swiftly mixes powders and sticky binders within a cylindrical bowl, while a rapid chopper on the side breaks the mixture into wet granules to prevent clumping. This fast process combines mixing and granule formation within minutes, and the Wet Rapid Mixing Granulator can provide heating or cooling as needed.
- Input:
- Main material in powder form, binding agent as paste
- Output:
- Solid, loose granules with approximately 15% moisture content
- Type:
- Mixing Granulation, Wet Granulation
- Additional Features:
- Mixing, Mild Crushing, Heating, Cooling
HG/GT-진공 드럼 스크레이퍼 건조기
카테고리: 전도 및 진공 건조기
Continuous Drying for Paste-like Materials:
In operation, the rotating drum picks up material as a thin film. Heat transfers from the inner to the outer wall, effectively evaporating moisture, while an internal scraper continuously converts the dried film into flake-like product in a short time.
- Input:
- Pasty, Viscous and Thick Materials
- Output:
- Flake-like Solids with 5%–8% moisture content
- Temperature:
- Inlet air temperature range of 120°C to 260°C
- Additional Feature:
- Cooling
GFG-수직형 혼합 유동층 건조기
카테고리: 대류 건조기, 유동층 건조기
Fluidized Bed Drying with Built-In Mixing:
The Vertical Blending Fluidized Bed Dryer is equipped with a mixing mechanism that helps form a fluidized bed inside the vessel when handling heavy loads. Ideal for mass production, it can process thick materials and is typically paired with wet granulation setups.
- Input:
- Powder and Granules, moisture < 20%
- Output:
- Powder and Granules, moisture 3%–5%
- Temperature:
- Inlet air temperature < 100°C
- Additional Feature:
- Stirring, Cooling
LZG-스파이럴 진동식 건조기
카테고리: 대류 건조기, 진동식 건조기
Method for Drying Pellets and Granules:
The Spiral Vibrating Dryer dries materials by using centrifugal vibration and gravity to move them in a bouncing path from top to bottom along a spiral bed. Fresh hot air enters from below, interacting thoroughly with the material for heat and mass transfer before leaving through the top — ensuring even drying.
- Input:
- Granular, short-rod and spherical solids with < 20% moisture
- Output:
- Granules, short rods and spheres with 3%–5% moisture
- Temperature:
- Inlet air temperature < 100°C
- Additional Feature:
- Cooling
건조 또는 조립 후 제품 냉각
DW 벨트 건조기, FLP Wurster 유동층 조립 코팅기, ZLG 수평 진동식 유동층 건조기, GHL 습식 고속 혼합 과립기, HG/GT 진공 드럼 스크레이퍼 건조기, GFG 수직 혼합 유동층 건조기, LZG 스파이럴 진동식 건조기는 모두 가공 후 소재를 안전한 취급 또는 보관 온도로 냉각하는 기능을 지원합니다.
건조 또는 조립 후 냉각이 중요한 이유
건조기나 과립기에서 바로 나온 고온의 제품은 너무 뜨거운 상태로 포장될 경우 변질, 고형화 또는 지속적인 반응이 일어날 수 있습니다. 정밀한 냉각은 보관 전에 과립 구조와 수분 평형을 안정화시킵니다. 유동층 및 진동식 설계는 건조와 동일한 공기 접촉 원리를 활용하여 효율적으로 냉각을 수행합니다.
