세라믹
세라믹 분야는 원료 세라믹 소재 가공에 사용되는 SINOTHERMO의 건조기, 회전식 킬른 및 분쇄기를 포함합니다. 제품 라인은 점토 및 광물 원료의 조분쇄, 습식 슬러리의 스핀 플래시 건조, 그리고 소성 전 고온 회전식 킬른 처리까지 아우릅니다.
CD 건조기
카테고리: 전도 및 진공 건조기
Continuous Drying for Liquid and Paste-like Materials:
The CD Dryer is designed for continuous drying of liquids and pastes. Utilizing indirectly heated discs, the dryer efficiently transfers heat to the material, creating a thin layer for rapid evaporation. This method ensures effective drying and consistent product quality.
- Input:
- Liquid and Pasty Materials
- Output:
- Dried Solids (flake or powder, depending on application)
- Heat Transfer Coefficient:
- Overall heat transfer coefficient: 2,300W/m²k
- Thermal Efficiency:
- 80 to 85% thermal efficiency
XSG-스핀 플래시 건조기
카테고리: 대류 건조기, 플래시 건조기
One-Step Continuous Flash Drying:
The Spin Flash Dryer dries pastes and filter cakes in a single continuous step. Hot air and mechanical agitation break up material while drying — no pre-crushing needed.
- Input:
- Pastes, Filter Cakes, Thick Slurries
- Output:
- Powder with 3%-8% moisture content
- Temperature:
- Inlet air temperature range of 150°C to 350°C
DW-벨트 건조기
카테고리: 대류 건조기
Continuous Convection Dryer with Mesh Belt:
The Belt Dryer can be configured with single or multiple mesh-belt layers, spreading material evenly for directional hot-air drying. Belt speed adjusts to each material's temperature and moisture content, so it runs at comparatively low temperatures while continuously processing large batches.
- Input:
- Permeable solids in sheets, strips, granules or blocks
- Output:
- Sheet, strip, granule or block solids with 3%–8% moisture content
- Temperature:
- Inlet air temperature < 200°C
- Additional Feature:
- Cooling
SET-스크류 압출식 과립기
카테고리: 조립기 및 압출기
Wet Granulation with Screw Extrusion Process:
By utilizing an extrusion process, this wet-granulation machine leverages the self-viscosity of a solid-liquid dispersion to bond powder particles, producing granules of consistent shape and size. The screw-extrusion mechanism generates enough force to form pellets without always requiring a binder — particularly suitable for high-viscosity materials. Optional water cooling is available.
- Input:
- Solid-liquid mixture (predominantly solid)
- Output:
- Moist cylindrical granules
- Type:
- Extrusion Granulation, Wet Granulation
CSJ-조분쇄기
카테고리: 분쇄기
Primary Crushing Solution:
Typically used for processing hard, large-sized solid materials, the Coarse Pulverizer effectively serves as a preliminary step before further fine pulverization, optimizing subsequent crushing processes.
- Input:
- Brittle Solids (< 100mm)
- Output:
- 0.5 to 20 mesh
WFJ-충격식 분쇄기
카테고리: 분쇄기
Optimal Choice for Ultra-Fine Granularity:
The Impact Pulverizer grinds materials to a particle size of 400 mesh or even finer, streamlining manufacturing processes. It can additionally be equipped with a cyclone collector and bag-type dust remover for cleaner processing.
- Input:
- Brittle Solids (up to 10mm)
- Output:
- 80 to 450 mesh
HZG-회전식 킬른
카테고리: 대류 건조기
Perfect for Large-Scale, Continuous Drying:
Wet material enters at one end of the Rotary Kiln, where internal flights agitate it and blend it thoroughly with hot air. This elongated drum dryer, spanning many metres, can process hundreds of tons per hour, and its drum speed adjusts from 1 to 10 RPM to suit different requirements.
- Input:
- Granular materials
- Output:
- Granules with 3%–5% moisture content
- Temperature:
- Inlet air temperature range of 40°C to 350°C
- Additional Feature:
- Mixing
세라믹을 위한 건조, 분쇄 및 킬른 처리
CD 건조기와 벨트 건조기는 세라믹 원료의 수분을 제거하고, 스핀 플래시 건조기는 세라믹 슬러리를 처리하며, 회전식 킬른(HZG)은 대량의 세라믹 소재를 고온에서 처리하고, 조분쇄기와 충격식 분쇄기는 세라믹 원료를 공정에 필요한 입자 크기로 분쇄합니다.
세라믹 원료 가공 단계
조분쇄는 미세 분쇄 전에 원료 광물 및 점토 투입물을 분해합니다. 충격식 분쇄는 세라믹 조성물에 필요한 미세 입자 크기를 구현합니다. 스핀 플래시 건조는 소성 전 습식 세라믹 슬러리를 효율적으로 처리합니다. 스크류 압출식 과립기는 세라믹 소재를 중간 형태로 성형하는 데 사용됩니다.
