환경
환경 분야는 슬러지, 폐기물 스트림 및 부산물 소재 처리에 사용되는 SINOTHERMO의 진공 패들 및 드럼 스크레이퍼 건조기, 로터리 킬른, 분쇄기를 포괄합니다. 이러한 구성은 처리를 용이하게 하기 위해 부피와 수분을 줄이고, 점성이 높은 폐기물 페이스트를 처리하며, 고온 폐기물 처리 및 소재 회수를 지원합니다.
CD 건조기
카테고리: 전도 및 진공 건조기
Continuous Drying for Liquid and Paste-like Materials:
The CD Dryer is designed for continuous drying of liquids and pastes. Utilizing indirectly heated discs, the dryer efficiently transfers heat to the material, creating a thin layer for rapid evaporation. This method ensures effective drying and consistent product quality.
- Input:
- Liquid and Pasty Materials
- Output:
- Dried Solids (flake or powder, depending on application)
- Heat Transfer Coefficient:
- Overall heat transfer coefficient: 2,300W/m²k
- Thermal Efficiency:
- 80 to 85% thermal efficiency
KJG-진공 패들 건조기
카테고리: 전도 및 진공 건조기
Vacuum Conduction Dryer with Hollow Paddle Agitator:
With its heating surface and wedge-shaped hollow paddle agitators, the Vacuum Paddle Dryer outperforms conventional rake vacuum dryers in heating effectiveness. It aids in the movement and heating of materials under vacuum, suitable for flammable, explosive, organic solvent-based and heat-sensitive materials.
- Input:
- Liquids, Slurries, Pastes, Mashes
- Output:
- Powder with 3%-10% moisture content
- Temperature:
- Heat source temperature range of 50°C to 200°C
- Additional Feature:
- Mixing, Mild Crushing
DW-벨트 건조기
카테고리: 대류 건조기
Continuous Convection Dryer with Mesh Belt:
The Belt Dryer can be configured with single or multiple mesh-belt layers, spreading material evenly for directional hot-air drying. Belt speed adjusts to each material's temperature and moisture content, so it runs at comparatively low temperatures while continuously processing large batches.
- Input:
- Permeable solids in sheets, strips, granules or blocks
- Output:
- Sheet, strip, granule or block solids with 3%–8% moisture content
- Temperature:
- Inlet air temperature < 200°C
- Additional Feature:
- Cooling
CSJ-조분쇄기
카테고리: 분쇄기
Primary Crushing Solution:
Typically used for processing hard, large-sized solid materials, the Coarse Pulverizer effectively serves as a preliminary step before further fine pulverization, optimizing subsequent crushing processes.
- Input:
- Brittle Solids (< 100mm)
- Output:
- 0.5 to 20 mesh
HZG-회전식 킬른
카테고리: 대류 건조기
Perfect for Large-Scale, Continuous Drying:
Wet material enters at one end of the Rotary Kiln, where internal flights agitate it and blend it thoroughly with hot air. This elongated drum dryer, spanning many metres, can process hundreds of tons per hour, and its drum speed adjusts from 1 to 10 RPM to suit different requirements.
- Input:
- Granular materials
- Output:
- Granules with 3%–5% moisture content
- Temperature:
- Inlet air temperature range of 40°C to 350°C
- Additional Feature:
- Mixing
HG/GT-진공 드럼 스크레이퍼 건조기
카테고리: 전도 및 진공 건조기
Continuous Drying for Paste-like Materials:
In operation, the rotating drum picks up material as a thin film. Heat transfers from the inner to the outer wall, effectively evaporating moisture, while an internal scraper continuously converts the dried film into flake-like product in a short time.
- Input:
- Pasty, Viscous and Thick Materials
- Output:
- Flake-like Solids with 5%–8% moisture content
- Temperature:
- Inlet air temperature range of 120°C to 260°C
- Additional Feature:
- Cooling
공기식 플래시 건조기
카테고리: 대류 건조기, 플래시 건조기
Integrated Handling for Heat-Sensitive, Loose Solid Materials:
Designed for temperature-sensitive and slightly viscous materials, this equipment offers a wide range of uses for loose solid materials. Its modular design allows drying and grinding stages to be added to meet varying customer requirements.
- Input:
- Non-viscous, loose solid materials
- Output:
- Powder, granules, with 3%–6% moisture content
- Temperature:
- Inlet temperature < 200°C
- Additional Feature:
- Grinding
환경 처리를 위한 건조 및 분쇄
KJG 진공 패들 건조기와 HG/GT 진공 드럼 스크레이퍼 건조기는 슬러지 및 폐기물 스트림 건조를 처리하고, CD 건조기와 벨트 건조기는 대용량 환경 소재를 처리하며, 로터리 킬른은 고온 폐기물 처리를 담당하고, 조분쇄기는 폐기물 소재를 작업 가능한 입자 크기로 줄여줍니다.
환경 처리 응용 분야
진공 패들 건조는 처리 또는 재사용을 용이하게 하기 위해 슬러지 부피를 줄여줍니다. 드럼 스크레이퍼 건조는 일반적인 건조기로는 흐르지 않는 점성이 높은 폐기물 페이스트를 처리합니다. 로터리 킬른 처리는 고온 폐기물 처리 및 소재 회수에 적합합니다. 공기식 플래시 건조는 폐기물 스트림의 수분 제거를 위한 빠르고 연속적인 옵션을 제공합니다.
