Plastik

Plastik merangkumi pengadun dan pengering lapisan terbendalir bergetar SINOTHERMO yang digunakan dalam pemprosesan serbuk plastik. Rangkaian ini mencampurkan bahan tambahan, bahan pewarna dan penstabil ke dalam formulasi serbuk plastik asas serta menyingkirkan lembapan daripada pelet dan serbuk resin sebelum proses penyemperitan atau acuan.

DSH-Pengadun Skru Kon

DSH-Pengadun Skru Kon

Kategori: Pencampur, Pengadun Kon, Pengadun Skru

Gentle Conical Screw Blending:

The Conical Screw Mixer combines a rotating screw with a conical vessel for gentle, low-shear blending of powders and granules — fast discharge with minimal residue.

Input:
Powders, Granules
Output:
Homogeneous blends
Additional Feature:
Fast discharge, minimal residue
ZLG-Pengering Lapisan Terbendalir Getaran Mendatar

ZLG-Pengering Lapisan Terbendalir Getaran Mendatar

Kategori: Pengering Perolakan, Pengering Lapisan Terbendalir, Pengering Getaran

Continuous Drying Solution for Granular Materials:

Operating on the principle of fluidization combined with vibration, the Vibrating Fluid Bed Dryer processes granules by circulating them on heated air that dries them evenly. This approach minimizes surface damage, prevents pollution thanks to its enclosed design, and gives granules time to settle — facilitating stable, continuous production.

Input:
Granules with moisture content < 20%
Output:
Granules with 1%–5% moisture content
Temperature:
Inlet air temperature < 200°C
Additional Feature:
Cooling
Pengadun Dram Putaran

Pengadun Dram Putaran

Kategori: Pencampur, Pengadun Putaran

Innovative Multi-Axis Motion Rotary Drum Mixer:

The Rotary Drum Mixer transforms the mixing process by moving and combining motions on the x, y and z axes. This method guarantees thorough mixing of powders and granules with simplicity and effectiveness, making it an ideal choice for dry-mixing applications.

Input:
Solid powders, Granules
Type:
Dry Mixing
LZG-Pengering Getaran Spiral

LZG-Pengering Getaran Spiral

Kategori: Pengering Perolakan, Pengering Getaran

Method for Drying Pellets and Granules:

The Spiral Vibrating Dryer dries materials by using centrifugal vibration and gravity to move them in a bouncing path from top to bottom along a spiral bed. Fresh hot air enters from below, interacting thoroughly with the material for heat and mass transfer before leaving through the top — ensuring even drying.

Input:
Granular, short-rod and spherical solids with < 20% moisture
Output:
Granules, short rods and spheres with 3%–5% moisture
Temperature:
Inlet air temperature < 100°C
Additional Feature:
Cooling
WLDH-Pengadun Reben Mendatar

WLDH-Pengadun Reben Mendatar

Kategori: Pencampur, Pengadun Mendatar, Blender Reben

Equipped with Horizontal Screw Belts:

The Horizontal Ribbon Mixer offers efficient material blending. Its cylinder holds a shaft with surrounding ribbon belts that rotate at equal speed: the outer belts move material from both ends toward the center while the inner belts move it from the center back out, folding the batch together for thorough mixing.

Input:
Powders, Granules, Small amounts of liquid
Type:
Dry Mixing, Mild Wet Mixing

Pencampuran dan Pengeringan untuk Pemprosesan Serbuk Plastik

Pengadun skru kon DSH dan pengadun dram putaran mencampurkan formulasi serbuk plastik dan bahan tambahan, pengering lapisan terbendalir bergetar mendatar ZLG dan pengering bergetar spiral LZG mengeringkan resin dan serbuk plastik, manakala pengadun reben mendatar mengendalikan pencampuran sebatian plastik secara pukal.

Keperluan Pemprosesan Serbuk Plastik

Pengeringan lapisan terbendalir bergetar dan getaran spiral menyingkirkan lembapan daripada pelet dan serbuk resin plastik sebelum diproses. Pencampuran skru kon mencampurkan bahan tambahan, bahan pewarna dan penstabil ke dalam serbuk plastik asas secara sekata. Pencampuran dram putaran dan reben sesuai untuk pencampuran sebatian bersaiz kelompok besar sebelum proses penyemperitan atau acuan.

Bagaimana Anda Mengenali Kami? (Pilihan)

Penerangan Terperinci Keperluan Anda