Keramik
Keramik mencakup pengering, rotary kiln, dan pulverizer SINOTHERMO yang digunakan untuk mengolah bahan baku keramik mentah. Rangkaian produk ini meliputi pra-penghancuran kasar tanah liat dan bahan baku mineral, pengeringan spin-flash untuk slurry basah, serta pemrosesan rotary kiln bersuhu tinggi sebelum tahap pembakaran.
CD Dryer
Kategori: Pengering Konduksi dan Vakum
Continuous Drying for Liquid and Paste-like Materials:
The CD Dryer is designed for continuous drying of liquids and pastes. Utilizing indirectly heated discs, the dryer efficiently transfers heat to the material, creating a thin layer for rapid evaporation. This method ensures effective drying and consistent product quality.
- Input:
- Liquid and Pasty Materials
- Output:
- Dried Solids (flake or powder, depending on application)
- Heat Transfer Coefficient:
- Overall heat transfer coefficient: 2,300W/m²k
- Thermal Efficiency:
- 80 to 85% thermal efficiency
XSG-Spin Flash Dryer
Kategori: Pengering Konveksi, Pengering Flash
One-Step Continuous Flash Drying:
The Spin Flash Dryer dries pastes and filter cakes in a single continuous step. Hot air and mechanical agitation break up material while drying — no pre-crushing needed.
- Input:
- Pastes, Filter Cakes, Thick Slurries
- Output:
- Powder with 3%-8% moisture content
- Temperature:
- Inlet air temperature range of 150°C to 350°C
DW-Pengering Ban berjalan
Kategori: Pengering Konveksi
Continuous Convection Dryer with Mesh Belt:
The Belt Dryer can be configured with single or multiple mesh-belt layers, spreading material evenly for directional hot-air drying. Belt speed adjusts to each material's temperature and moisture content, so it runs at comparatively low temperatures while continuously processing large batches.
- Input:
- Permeable solids in sheets, strips, granules or blocks
- Output:
- Sheet, strip, granule or block solids with 3%–8% moisture content
- Temperature:
- Inlet air temperature < 200°C
- Additional Feature:
- Cooling
SET-Granulator Ekstruder Sekrup
Kategori: Granulator dan Ekstruder
Wet Granulation with Screw Extrusion Process:
By utilizing an extrusion process, this wet-granulation machine leverages the self-viscosity of a solid-liquid dispersion to bond powder particles, producing granules of consistent shape and size. The screw-extrusion mechanism generates enough force to form pellets without always requiring a binder — particularly suitable for high-viscosity materials. Optional water cooling is available.
- Input:
- Solid-liquid mixture (predominantly solid)
- Output:
- Moist cylindrical granules
- Type:
- Extrusion Granulation, Wet Granulation
CSJ-Pulverizer Kasar
Kategori: Pulverizer
Primary Crushing Solution:
Typically used for processing hard, large-sized solid materials, the Coarse Pulverizer effectively serves as a preliminary step before further fine pulverization, optimizing subsequent crushing processes.
- Input:
- Brittle Solids (< 100mm)
- Output:
- 0.5 to 20 mesh
WFJ-Pulverizer Tumbukan
Kategori: Pulverizer
Optimal Choice for Ultra-Fine Granularity:
The Impact Pulverizer grinds materials to a particle size of 400 mesh or even finer, streamlining manufacturing processes. It can additionally be equipped with a cyclone collector and bag-type dust remover for cleaner processing.
- Input:
- Brittle Solids (up to 10mm)
- Output:
- 80 to 450 mesh
HZG-Kiln Putar
Kategori: Pengering Konveksi
Perfect for Large-Scale, Continuous Drying:
Wet material enters at one end of the Rotary Kiln, where internal flights agitate it and blend it thoroughly with hot air. This elongated drum dryer, spanning many metres, can process hundreds of tons per hour, and its drum speed adjusts from 1 to 10 RPM to suit different requirements.
- Input:
- Granular materials
- Output:
- Granules with 3%–5% moisture content
- Temperature:
- Inlet air temperature range of 40°C to 350°C
- Additional Feature:
- Mixing
Pengeringan, Penghalusan, dan Pemrosesan Kiln untuk Keramik
Pengering CD dan pengering ban berjalan menghilangkan kelembapan dari bahan baku keramik, spin flash dryer menangani slurry keramik, rotary kiln (HZG) memproses material keramik curah pada suhu tinggi, dan pulverizer kasar serta tumbukan mereduksi bahan baku keramik hingga mencapai ukuran partikel yang sesuai untuk pemrosesan.
Tahapan Pemrosesan Bahan Baku Keramik
Penghancuran kasar memecah bahan baku mineral dan tanah liat sebelum penggilingan halus. Penghancuran tumbukan menghasilkan ukuran partikel halus yang dibutuhkan formulasi keramik. Pengeringan spin flash menangani slurry keramik basah secara efisien sebelum proses pembakaran. Granulator ekstruder sekrup mendukung pembentukan material keramik menjadi bentuk antara.
Jelajahi Lebih Lanjut
Chemicals →
Menggunakan peralatan penghalusan dan pengeringan yang sama seperti yang dipakai dalam pengolahan mineral.
Pharmaceuticals →
Menggunakan teknologi pengering CD yang sama seperti pada aplikasi pengeringan konduksi lainnya.
Environment →
Menggunakan rotary kiln dan peralatan pengeringan yang sama, yang dapat diterapkan pada pengolahan produk sampingan mineral.
