Lingkungan
Lingkungan mencakup pengering paddle vakum dan drum scraper vakum, rotary kiln, serta pulverizer dari SINOTHERMO yang digunakan untuk mengolah lumpur, aliran limbah, dan material produk sampingan. Konfigurasi ini mengurangi volume dan kadar air untuk mempermudah pembuangan, menangani pasta limbah dengan viskositas tinggi, serta mendukung pengolahan limbah suhu tinggi dan pemulihan material.
CD Dryer
Kategori: Pengering Konduksi dan Vakum
Continuous Drying for Liquid and Paste-like Materials:
The CD Dryer is designed for continuous drying of liquids and pastes. Utilizing indirectly heated discs, the dryer efficiently transfers heat to the material, creating a thin layer for rapid evaporation. This method ensures effective drying and consistent product quality.
- Input:
- Liquid and Pasty Materials
- Output:
- Dried Solids (flake or powder, depending on application)
- Heat Transfer Coefficient:
- Overall heat transfer coefficient: 2,300W/m²k
- Thermal Efficiency:
- 80 to 85% thermal efficiency
KJG-Vacuum Paddle Dryer
Kategori: Pengering Konduksi dan Vakum
Vacuum Conduction Dryer with Hollow Paddle Agitator:
With its heating surface and wedge-shaped hollow paddle agitators, the Vacuum Paddle Dryer outperforms conventional rake vacuum dryers in heating effectiveness. It aids in the movement and heating of materials under vacuum, suitable for flammable, explosive, organic solvent-based and heat-sensitive materials.
- Input:
- Liquids, Slurries, Pastes, Mashes
- Output:
- Powder with 3%-10% moisture content
- Temperature:
- Heat source temperature range of 50°C to 200°C
- Additional Feature:
- Mixing, Mild Crushing
DW-Pengering Ban berjalan
Kategori: Pengering Konveksi
Continuous Convection Dryer with Mesh Belt:
The Belt Dryer can be configured with single or multiple mesh-belt layers, spreading material evenly for directional hot-air drying. Belt speed adjusts to each material's temperature and moisture content, so it runs at comparatively low temperatures while continuously processing large batches.
- Input:
- Permeable solids in sheets, strips, granules or blocks
- Output:
- Sheet, strip, granule or block solids with 3%–8% moisture content
- Temperature:
- Inlet air temperature < 200°C
- Additional Feature:
- Cooling
CSJ-Pulverizer Kasar
Kategori: Pulverizer
Primary Crushing Solution:
Typically used for processing hard, large-sized solid materials, the Coarse Pulverizer effectively serves as a preliminary step before further fine pulverization, optimizing subsequent crushing processes.
- Input:
- Brittle Solids (< 100mm)
- Output:
- 0.5 to 20 mesh
HZG-Kiln Putar
Kategori: Pengering Konveksi
Perfect for Large-Scale, Continuous Drying:
Wet material enters at one end of the Rotary Kiln, where internal flights agitate it and blend it thoroughly with hot air. This elongated drum dryer, spanning many metres, can process hundreds of tons per hour, and its drum speed adjusts from 1 to 10 RPM to suit different requirements.
- Input:
- Granular materials
- Output:
- Granules with 3%–5% moisture content
- Temperature:
- Inlet air temperature range of 40°C to 350°C
- Additional Feature:
- Mixing
HG/GT-Drum Scraper Dryer Vakum
Kategori: Pengering Konduksi dan Vakum
Continuous Drying for Paste-like Materials:
In operation, the rotating drum picks up material as a thin film. Heat transfers from the inner to the outer wall, effectively evaporating moisture, while an internal scraper continuously converts the dried film into flake-like product in a short time.
- Input:
- Pasty, Viscous and Thick Materials
- Output:
- Flake-like Solids with 5%–8% moisture content
- Temperature:
- Inlet air temperature range of 120°C to 260°C
- Additional Feature:
- Cooling
Pneumatic Flash Dryer
Kategori: Pengering Konveksi, Pengering Flash
Integrated Handling for Heat-Sensitive, Loose Solid Materials:
Designed for temperature-sensitive and slightly viscous materials, this equipment offers a wide range of uses for loose solid materials. Its modular design allows drying and grinding stages to be added to meet varying customer requirements.
- Input:
- Non-viscous, loose solid materials
- Output:
- Powder, granules, with 3%–6% moisture content
- Temperature:
- Inlet temperature < 200°C
- Additional Feature:
- Grinding
Pengeringan dan Pengecilan Ukuran untuk Pengolahan Lingkungan
Pengering paddle vakum KJG dan pengering drum scraper vakum HG/GT menangani pengeringan lumpur dan aliran limbah, pengering CD dan pengering ban berjalan mengolah material lingkungan dalam jumlah besar, rotary kiln menangani pengolahan limbah suhu tinggi, dan penghancur kasar mengecilkan material limbah hingga ukuran partikel yang mudah diolah.
Aplikasi Pengolahan Lingkungan
Pengeringan paddle vakum mengurangi volume lumpur untuk mempermudah pembuangan atau pemanfaatan kembali. Pengeringan drum scraper menangani pasta limbah dengan viskositas tinggi yang tidak dapat mengalir melalui pengering konvensional. Pengolahan dengan rotary kiln cocok untuk pengolahan limbah suhu tinggi dan pemulihan material. Pengeringan flash pneumatik menawarkan opsi cepat dan kontinu untuk menghilangkan kadar air dari aliran limbah.
Jelajahi Lebih Lanjut
Chemicals →
Menggunakan peralatan pengeringan dan penghancuran yang sama dengan yang dipakai dalam pengolahan limbah industri.
Ceramics →
Menggunakan teknologi rotary kiln yang sama untuk pengolahan material suhu tinggi.
Foods →
Menggunakan peralatan pengeringan yang sama, yang dapat diterapkan pada penanganan produk sampingan dan limbah industri makanan.
