流動層造粒機
流動層造粒機は、混合、造粒、乾燥を1つの流動層チャンバー内で一体化し、粉末と液体バインダーから均一で流動性の高い顆粒を単一の連続プロセスで形成します。
FLP-ウルスター流動層造粒コーティング機
カテゴリー: 造粒機・押出機, 流動層造粒機
All-in-One Mixing, Granulating, Coating, and Drying:
After the main material forms a fluidized bed at the bottom, granules are created with the aid of adhesive sprayed from the top nozzles in the granulating chamber. Subsequently, coating material is sprayed onto the granules from bottom or side nozzles within the chamber for effective coating.
- Input:
- Main ingredient as powder (for granulation) or granules and pellets (for coating), with adhesive or coating material in liquid form
- Output:
- Solid medium-sized granules with 3%–5% moisture content
- Type:
- Spray Fluidized Bed, Wet Granulation
- Additional Features:
- Mixing, Coating, Drying, Cooling
FL-流動層造粒機
カテゴリー: 造粒機・押出機, 流動層造粒機
All-in-One Mixing, Granulating, and Drying:
Materials form a fluidized bed at the bottom, where granules are created in the granulation chamber with the help of spray nozzles dispensing binder. The hopper allows several raw materials to be added and mixed during the fluidization process.
- Input:
- Main ingredient as powder, adhesive in liquid form
- Output:
- Solid medium-sized granules with 3%–5% moisture content
- Type:
- Spray Fluidized Bed, Wet Granulation
- Additional Features:
- Mixing, Drying, Cooling
PGL-流動層スプレー造粒機
カテゴリー: 造粒機・押出機, 流動層造粒機
Combines Mixing, Granulating and Drying for High-Excipient Granulation:
Excipient-rich granulation finds an ideal match in this unit. Excipients in the hopper form a fluidized bed that acts as seeds or carriers, while the main material — typically a liquid extract making up a smaller proportion of the batch — is sprayed from above and merges at the bed's edge for granulation. This method is particularly suited to heat-sensitive materials.
- Input:
- Carrier materials in powder form, main material in liquid form
- Output:
- Solid medium-sized granules, 3%–5% moisture content
- Type:
- Spray Fluidized Bed, Wet Granulation
- Additional Features:
- Mixing, Drying, Cooling
1つのチャンバーでコーティング・造粒・スプレー造粒を実現
FLPウルスター流動層造粒コーターは、空気中に浮遊させた粒子に均一なコーティングを施し、FL流動層造粒機は単一の流動層チャンバー内で粉末とバインダーから顆粒を形成し、PGL流動層スプレー造粒機はスプレー噴霧と流動化を組み合わせて粒子成長を制御します。
混合・造粒・乾燥をワンステップで実現
3機種はいずれも、混合・造粒・乾燥を1つの流動層チャンバー内で一体化しており、湿式混合と乾燥を別工程で行うラインと比較して処理工程を削減できます。 ウルスター構成(FLP)は、マスキングや放出制御など、積層コーティング用途に特に適しています。 スプレー造粒(PGL)は、流動化した粉末層に液体バインダーを直接噴霧して顆粒を形成する用途に適しています。
