湿式混合

湿式混合とは、SINOTHERMOのコニカルスクリュー式、高速式、プラウシェア式、リボン式ミキサーを指し、粉体を液体バインダー、溶剤、水分と均一な湿潤マスまたはペースト状に混合します。この工程は通常、医薬品・化学品の配合ラインにおいて、後工程の造粒や乾燥に先立って行われます。

DSH-Conical Screw Mixer

DSH-Conical Screw Mixer

カテゴリー: 混合機, コニカルミキサー, スクリューミキサー

Gentle Conical Screw Blending:

The Conical Screw Mixer combines a rotating screw with a conical vessel for gentle, low-shear blending of powders and granules — fast discharge with minimal residue.

Input:
Powders, Granules
Output:
Homogeneous blends
Additional Feature:
Fast discharge, minimal residue
GHJ-High Speed Mixer

GHJ-High Speed Mixer

カテゴリー: 混合機

Rapid Mixing Capability:

By using high-speed chopper blades positioned on the sides of the machine, the High Speed Mixer stirs materials and boosts their movement, enhancing mixing efficiency. The collaborative action of these blades gives consistent blending, with each blend taking only a few minutes.

Input:
Powders, Granules, Minor Liquids
Type:
Dry Mixing, Mild Wet Mixing
Additional Features:
Mild Crushing
LDH-Ploughshare Mixer

LDH-Ploughshare Mixer

カテゴリー: 混合機, 横型ミキサー

Great for Processing Materials That Require Breaking Down:

The Ploughshare Mixer consists of a transmission system, a cylinder, ploughshares and flying blades. The ploughshares promote movement along the cylinder wall while high-speed flying blades disperse materials efficiently, ensuring quick and even mixing.

Input:
Powders, Granules, Small amounts of liquids
Type:
Dry Mixing, Mild Wet Mixing
Additional Feature:
Mild Crushing
WLDH-Horizontal Ribbon Mixer

WLDH-Horizontal Ribbon Mixer

カテゴリー: 混合機, 横型ミキサー, リボンブレンダー

Equipped with Horizontal Screw Belts:

The Horizontal Ribbon Mixer offers efficient material blending. Its cylinder holds a shaft with surrounding ribbon belts that rotate at equal speed: the outer belts move material from both ends toward the center while the inner belts move it from the center back out, folding the batch together for thorough mixing.

Input:
Powders, Granules, Small amounts of liquid
Type:
Dry Mixing, Mild Wet Mixing
DLH-Conical Ribbon Screw Blender

DLH-Conical Ribbon Screw Blender

カテゴリー: 混合機, コニカルミキサー, リボンブレンダー, スクリューミキサー

Equipped with Rotating Spiral Belt:

A screw encased in a ribbon rotates simultaneously to create a swirling motion, lifting material upward in a spiral from the base of the cone before it descends by gravity. Optional features such as spray atomization and jacket heating or cooling are also available.

Input:
Solids, Powders, Granules, Liquids
Type:
Dry Mixing, Wet Mixing
Additional Features:
Humidifying, Drying, Cooling

ペースト・液体湿潤材料の混合

DSHコニカルスクリューミキサー、GHJ高速ミキサー、LDHプラウシェアミキサー、WLDH横型リボンミキサー、DLHコニカルリボンスクリューブレンダーはいずれも湿式混合に対応し、粉体を液体バインダー、溶剤、水分と混合して均一な湿潤マスまたはペースト状に仕上げます。

せん断レベル別の湿式混合

高速混合(GHJ)は液体を粉体中に急速に分散させ、迅速な湿潤化を実現します。 プラウシェア混合(LDH)は高速混合とオプションのチョッパー作動を組み合わせ、湿った塊を粉砕します。 コニカルスクリュー式およびリボンスクリュー式は、後工程の造粒や乾燥前にコンパクトな設置面積で効率的な湿式混合を実現します。

当社をお知りになったきっかけ(任意)

ご要望の詳細