Penyejukan
Penyejukan merangkumi peralatan lapisan terbendalir dan getaran SINOTHERMO yang digunakan untuk menurunkan suhu produk kering atau bergranul kepada suhu yang selamat untuk pengendalian atau penyimpanan. Penyejukan terkawal sejurus selepas pengeringan atau penggranulan menstabilkan struktur dan keseimbangan lembapan sebelum pembungkusan, menggunakan prinsip sentuhan udara yang sama seperti pengeringan.
DW-Pengering Tali sawat
Kategori: Pengering Perolakan
Continuous Convection Dryer with Mesh Belt:
The Belt Dryer can be configured with single or multiple mesh-belt layers, spreading material evenly for directional hot-air drying. Belt speed adjusts to each material's temperature and moisture content, so it runs at comparatively low temperatures while continuously processing large batches.
- Input:
- Permeable solids in sheets, strips, granules or blocks
- Output:
- Sheet, strip, granule or block solids with 3%–8% moisture content
- Temperature:
- Inlet air temperature < 200°C
- Additional Feature:
- Cooling
Mesin Penyalut Granulasi Lapisan Terbendalir FLP-Wurster
Kategori: Granulator dan Penyemperit, Granulator Lapisan Bendalir
All-in-One Mixing, Granulating, Coating, and Drying:
After the main material forms a fluidized bed at the bottom, granules are created with the aid of adhesive sprayed from the top nozzles in the granulating chamber. Subsequently, coating material is sprayed onto the granules from bottom or side nozzles within the chamber for effective coating.
- Input:
- Main ingredient as powder (for granulation) or granules and pellets (for coating), with adhesive or coating material in liquid form
- Output:
- Solid medium-sized granules with 3%–5% moisture content
- Type:
- Spray Fluidized Bed, Wet Granulation
- Additional Features:
- Mixing, Coating, Drying, Cooling
ZLG-Pengering Lapisan Terbendalir Getaran Mendatar
Kategori: Pengering Perolakan, Pengering Lapisan Terbendalir, Pengering Getaran
Continuous Drying Solution for Granular Materials:
Operating on the principle of fluidization combined with vibration, the Vibrating Fluid Bed Dryer processes granules by circulating them on heated air that dries them evenly. This approach minimizes surface damage, prevents pollution thanks to its enclosed design, and gives granules time to settle — facilitating stable, continuous production.
- Input:
- Granules with moisture content < 20%
- Output:
- Granules with 1%–5% moisture content
- Temperature:
- Inlet air temperature < 200°C
- Additional Feature:
- Cooling
GHL-Granulator Pencampuran Basah Pantas
Kategori: Granulator dan Penyemperit
Cutting-Edge Wet Granulation Technology:
A paddle at the base swiftly mixes powders and sticky binders within a cylindrical bowl, while a rapid chopper on the side breaks the mixture into wet granules to prevent clumping. This fast process combines mixing and granule formation within minutes, and the Wet Rapid Mixing Granulator can provide heating or cooling as needed.
- Input:
- Main material in powder form, binding agent as paste
- Output:
- Solid, loose granules with approximately 15% moisture content
- Type:
- Mixing Granulation, Wet Granulation
- Additional Features:
- Mixing, Mild Crushing, Heating, Cooling
HG/GT-Pengering Scraper Dram Vakum
Kategori: Pengering Konduksi dan Vakum
Continuous Drying for Paste-like Materials:
In operation, the rotating drum picks up material as a thin film. Heat transfers from the inner to the outer wall, effectively evaporating moisture, while an internal scraper continuously converts the dried film into flake-like product in a short time.
- Input:
- Pasty, Viscous and Thick Materials
- Output:
- Flake-like Solids with 5%–8% moisture content
- Temperature:
- Inlet air temperature range of 120°C to 260°C
- Additional Feature:
- Cooling
GFG-Pengering Lapisan Terbendalir Pencampuran Menegak
Kategori: Pengering Perolakan, Pengering Lapisan Terbendalir
Fluidized Bed Drying with Built-In Mixing:
The Vertical Blending Fluidized Bed Dryer is equipped with a mixing mechanism that helps form a fluidized bed inside the vessel when handling heavy loads. Ideal for mass production, it can process thick materials and is typically paired with wet granulation setups.
- Input:
- Powder and Granules, moisture < 20%
- Output:
- Powder and Granules, moisture 3%–5%
- Temperature:
- Inlet air temperature < 100°C
- Additional Feature:
- Stirring, Cooling
LZG-Pengering Getaran Spiral
Kategori: Pengering Perolakan, Pengering Getaran
Method for Drying Pellets and Granules:
The Spiral Vibrating Dryer dries materials by using centrifugal vibration and gravity to move them in a bouncing path from top to bottom along a spiral bed. Fresh hot air enters from below, interacting thoroughly with the material for heat and mass transfer before leaving through the top — ensuring even drying.
- Input:
- Granular, short-rod and spherical solids with < 20% moisture
- Output:
- Granules, short rods and spheres with 3%–5% moisture
- Temperature:
- Inlet air temperature < 100°C
- Additional Feature:
- Cooling
Menyejukkan Produk Selepas Pengeringan atau Penggranulan
Pengering tali sawat DW, mesin penyalut penggranulan lapisan terbendalir Wurster FLP, pengering lapisan terbendalir getaran mendatar ZLG, granulator pencampuran basah pantas GHL, pengering scraper dram vakum HG/GT, pengering lapisan terbendalir pencampuran menegak GFG dan pengering getaran spiral LZG kesemuanya menyokong penyejukan bahan kepada suhu yang selamat untuk pengendalian atau penyimpanan selepas pemprosesan.
Mengapa Penyejukan Penting Selepas Pengeringan atau Penggranulan
Produk panas terus daripada pengering atau granulator boleh merosot, mengeras atau terus bertindak balas jika dibungkus dalam keadaan terlalu panas. Penyejukan terkawal menstabilkan struktur granul dan keseimbangan lembapan sebelum penyimpanan. Reka bentuk lapisan terbendalir dan getaran menyejukkan dengan cekap menggunakan prinsip sentuhan udara yang sama seperti pengeringan.
Terokai Lagi
