Pengeringan Berterusan
Pengeringan Berterusan merangkumi pengering semburan, flash, lapisan terbendalir, tali sawat, kiln dan konduksi-vakum SINOTHERMO yang menjalankan bahan secara aliran berterusan tanpa gangguan. Ini memberikan hasil keluaran yang stabil dan bervolum tinggi selaras dengan jadual pengeluaran, tanpa masa henti pemuatan dan pemunggahan yang diperlukan oleh kelompok diskret.
Pengering CD
Kategori: Pengering Konduksi dan Vakum
Continuous Drying for Liquid and Paste-like Materials:
The CD Dryer is designed for continuous drying of liquids and pastes. Utilizing indirectly heated discs, the dryer efficiently transfers heat to the material, creating a thin layer for rapid evaporation. This method ensures effective drying and consistent product quality.
- Input:
- Liquid and Pasty Materials
- Output:
- Dried Solids (flake or powder, depending on application)
- Heat Transfer Coefficient:
- Overall heat transfer coefficient: 2,300W/m²k
- Thermal Efficiency:
- 80 to 85% thermal efficiency
Pengering Semburan Emparan LPG
Kategori: Pengering Perolakan, Pengering Semburan
Advanced Liquid-to-Powder Process:
A high-speed centrifugal atomizer at the tower's peak transforms materials into super fine liquid drops that dry quickly upon contact with hot air — perfect for precise particle size, moisture, density and shape standards.
- Input:
- Solutions, Emulsions, Suspensions
- Output:
- Powder with 3%-5% moisture content
- Temperature:
- Inlet air temperature range of 150°C to 500°C
YPG-Pengering Semburan Tekanan
Kategori: Pengering Perolakan, Pengering Semburan
High-Pressure Nozzle Atomization:
The Pressure Spray Dryer atomizes feed liquid through high-pressure nozzles, producing coarser and denser granules with excellent flowability — widely used for foods, chemicals and dairy powders.
- Input:
- Solutions, Emulsions, Suspensions
- Output:
- Coarse powder or granules with 3%-5% moisture content
- Temperature:
- Inlet air temperature range of 150°C to 350°C
XSG-Pengering Spin Flash
Kategori: Pengering Perolakan, Pengering Flash
One-Step Continuous Flash Drying:
The Spin Flash Dryer dries pastes and filter cakes in a single continuous step. Hot air and mechanical agitation break up material while drying — no pre-crushing needed.
- Input:
- Pastes, Filter Cakes, Thick Slurries
- Output:
- Powder with 3%-8% moisture content
- Temperature:
- Inlet air temperature range of 150°C to 350°C
PLG-Pengering Plat Menegak Vakum
Kategori: Pengering Konduksi dan Vakum
Effective Continuous Vacuum Conduction Dryer:
The Vacuum Plate Dryer incorporates discs for efficient heating, providing a generous heating surface in a compact layout. It excels in vacuum operations, ideal for managing flammable, explosive and heat-sensitive materials.
- Input:
- Loose powder, Granules
- Output:
- Powder, Granules with 3%-8% moisture content
- Temperature:
- Heat source temperature <200°C
DW-Pengering Tali sawat
Kategori: Pengering Perolakan
Continuous Convection Dryer with Mesh Belt:
The Belt Dryer can be configured with single or multiple mesh-belt layers, spreading material evenly for directional hot-air drying. Belt speed adjusts to each material's temperature and moisture content, so it runs at comparatively low temperatures while continuously processing large batches.
- Input:
- Permeable solids in sheets, strips, granules or blocks
- Output:
- Sheet, strip, granule or block solids with 3%–8% moisture content
- Temperature:
- Inlet air temperature < 200°C
- Additional Feature:
- Cooling
ZLG-Pengering Lapisan Terbendalir Getaran Mendatar
Kategori: Pengering Perolakan, Pengering Lapisan Terbendalir, Pengering Getaran
Continuous Drying Solution for Granular Materials:
Operating on the principle of fluidization combined with vibration, the Vibrating Fluid Bed Dryer processes granules by circulating them on heated air that dries them evenly. This approach minimizes surface damage, prevents pollution thanks to its enclosed design, and gives granules time to settle — facilitating stable, continuous production.
- Input:
- Granules with moisture content < 20%
- Output:
- Granules with 1%–5% moisture content
- Temperature:
- Inlet air temperature < 200°C
- Additional Feature:
- Cooling
HZG-Rotary Kiln
Kategori: Pengering Perolakan
Perfect for Large-Scale, Continuous Drying:
Wet material enters at one end of the Rotary Kiln, where internal flights agitate it and blend it thoroughly with hot air. This elongated drum dryer, spanning many metres, can process hundreds of tons per hour, and its drum speed adjusts from 1 to 10 RPM to suit different requirements.
- Input:
- Granular materials
- Output:
- Granules with 3%–5% moisture content
- Temperature:
- Inlet air temperature range of 40°C to 350°C
- Additional Feature:
- Mixing
HG/GT-Pengering Scraper Dram Vakum
Kategori: Pengering Konduksi dan Vakum
Continuous Drying for Paste-like Materials:
In operation, the rotating drum picks up material as a thin film. Heat transfers from the inner to the outer wall, effectively evaporating moisture, while an internal scraper continuously converts the dried film into flake-like product in a short time.
- Input:
- Pasty, Viscous and Thick Materials
- Output:
- Flake-like Solids with 5%–8% moisture content
- Temperature:
- Inlet air temperature range of 120°C to 260°C
- Additional Feature:
- Cooling
GXP-Pengering Semburan Peredaran Tertutup
Kategori: Pengering Perolakan, Pengering Semburan
Optimal Drying for Sensitive Materials:
This explosion-proof spray dryer operates in a sealed environment, using inert gas as the drying medium to fully recover solvents from raw materials. The recyclable drying medium provides superior protection for sensitive materials.
- Input:
- Solutions, Emulsions, Suspensions
- Output:
- Powder with 3%–8% moisture content
- Temperature:
- Inlet air temperature range of 100°C to 300°C
- Suitability:
- Anaerobic, explosion-proof and low-temperature conditions
ZLPG-Pengering Semburan Ekstrak
Kategori: Pengering Perolakan, Pengering Semburan
Specialized Spray Dryer for Extracts:
The Extract Spray Dryer features a cylinder equipped with a cooling system specifically designed for drying extracts while keeping wall temperatures below 80°C. It includes an airbrush that cleans the walls during operation to prevent adhesion and protect the powder from burning.
- Input:
- Extracts (Liquid)
- Output:
- Extracts (Powder) with 3%–8% moisture content
- Temperature:
- Inlet air temperature range of 140°C to 180°C
- Additional Features:
- Freeze dehumidification, Air brush for tower cleaning
Pengering Flash Pneumatik
Kategori: Pengering Perolakan, Pengering Flash
Integrated Handling for Heat-Sensitive, Loose Solid Materials:
Designed for temperature-sensitive and slightly viscous materials, this equipment offers a wide range of uses for loose solid materials. Its modular design allows drying and grinding stages to be added to meet varying customer requirements.
- Input:
- Non-viscous, loose solid materials
- Output:
- Powder, granules, with 3%–6% moisture content
- Temperature:
- Inlet temperature < 200°C
- Additional Feature:
- Grinding
XF-Pengering Lapisan Terbendalir Mendatar
Kategori: Pengering Perolakan, Pengering Lapisan Terbendalir
Versatile Continuous Drying for Granules and Powder:
The Horizontal Fluidized Bed Dryer aerates damp materials with an upward air stream to dry or cool them. Built for continuous manufacturing, it offers residence times from a few seconds to minutes, ensuring effective processing.
- Input:
- Powders and Granules, moisture < 20%
- Output:
- Powders and Granules, moisture 3%–5%
- Temperature:
- Inlet air temperature < 100°C
- Additional Feature:
- Cooling
LZG-Pengering Getaran Spiral
Kategori: Pengering Perolakan, Pengering Getaran
Method for Drying Pellets and Granules:
The Spiral Vibrating Dryer dries materials by using centrifugal vibration and gravity to move them in a bouncing path from top to bottom along a spiral bed. Fresh hot air enters from below, interacting thoroughly with the material for heat and mass transfer before leaving through the top — ensuring even drying.
- Input:
- Granular, short-rod and spherical solids with < 20% moisture
- Output:
- Granules, short rods and spheres with 3%–5% moisture
- Temperature:
- Inlet air temperature < 100°C
- Additional Feature:
- Cooling
Reka Bentuk Berterusan Merentasi Jenis Suapan
Pengering semburan (LPG, YPG, GXP, ZLPG) secara berterusan mengabuk suapan cecair menjadi serbuk kering; pengering flash (XSG, Pneumatik) secara berterusan mengangkut kek basah melalui udara panas; pengering lapisan terbendalir (XF, ZLG) dan tali sawat (DW) menggerakkan bahan berbutir dan pukal secara berterusan; kiln putaran (HZG) dan unit konduksi-vakum (CD, PLG, HG/GT, ZYG) mengendalikan pemprosesan berterusan bagi pepejal pukal dan pes.
Sebab Pengeluar Memilih Berterusan Berbanding Kelompok
Hasil keluaran yang stabil selaras dengan jadual pengeluaran bervolum tinggi tanpa masa henti antara kelompok. Masa tinggal yang konsisten memberikan kandungan lembapan yang lebih seragam sepanjang keseluruhan larian pengeluaran. Kos buruh per unit output yang lebih rendah berbanding pemuatan dan pemunggahan kelompok diskret.
Terokai Lagi
Convective Drying →
Prinsip pengeringan sentuhan udara panas langsung yang mendasari kebanyakan jenis pengering berterusan.
Cooling →
Langkah susulan yang biasa selepas pengeringan berterusan untuk membawa produk ke suhu pengendalian.
Conduction Drying →
Alternatif pemindahan haba melalui sentuhan yang tersedia dalam sesetengah konfigurasi berterusan.
