Wet Blending
Wet Blending covers SINOTHERMO's conical screw, high-speed, ploughshare and ribbon mixers that combine powders with liquid binders, solvents or moisture into a uniform wet mass or paste. This step typically precedes downstream granulation or drying across pharmaceutical and chemical formulation lines.
DSH-Conical Screw Mixer
Categories: Mixer, Conical Mixer, Screw Mixer
Gentle Conical Screw Blending:
The Conical Screw Mixer combines a rotating screw with a conical vessel for gentle, low-shear blending of powders and granules — fast discharge with minimal residue.
- Input:
- Powders, Granules
- Output:
- Homogeneous blends
- Additional Feature:
- Fast discharge, minimal residue
GHJ-High Speed Mixer
Categories: Mixer
Rapid Mixing Capability:
By using high-speed chopper blades positioned on the sides of the machine, the High Speed Mixer stirs materials and boosts their movement, enhancing mixing efficiency. The collaborative action of these blades gives consistent blending, with each blend taking only a few minutes.
- Input:
- Powders, Granules, Minor Liquids
- Type:
- Dry Mixing, Mild Wet Mixing
- Additional Features:
- Mild Crushing
LDH-Ploughshare Mixer
Categories: Mixer, Horizontal Mixer
Great for Processing Materials That Require Breaking Down:
The Ploughshare Mixer consists of a transmission system, a cylinder, ploughshares and flying blades. The ploughshares promote movement along the cylinder wall while high-speed flying blades disperse materials efficiently, ensuring quick and even mixing.
- Input:
- Powders, Granules, Small amounts of liquids
- Type:
- Dry Mixing, Mild Wet Mixing
- Additional Feature:
- Mild Crushing
WLDH-Horizontal Ribbon Mixer
Categories: Mixer, Horizontal Mixer, Ribbon Blender
Equipped with Horizontal Screw Belts:
The Horizontal Ribbon Mixer offers efficient material blending. Its cylinder holds a shaft with surrounding ribbon belts that rotate at equal speed: the outer belts move material from both ends toward the center while the inner belts move it from the center back out, folding the batch together for thorough mixing.
- Input:
- Powders, Granules, Small amounts of liquid
- Type:
- Dry Mixing, Mild Wet Mixing
DLH-Conical Ribbon Screw Blender
Categories: Mixer, Conical Mixer, Ribbon Blender, Screw Mixer
Equipped with Rotating Spiral Belt:
A screw encased in a ribbon rotates simultaneously to create a swirling motion, lifting material upward in a spiral from the base of the cone before it descends by gravity. Optional features such as spray atomization and jacket heating or cooling are also available.
- Input:
- Solids, Powders, Granules, Liquids
- Type:
- Dry Mixing, Wet Mixing
- Additional Features:
- Humidifying, Drying, Cooling
Blending Pastes and Liquid-Wetted Materials
The DSH conical screw mixer, GHJ high speed mixer, LDH ploughshare mixer, WLDH horizontal ribbon mixer and DLH conical ribbon screw blender all handle wet blending — mixing powders with liquid binders, solvents or moisture into a uniform wet mass or paste.
Wet Blending Across Shear Levels
High-speed mixing (GHJ) rapidly disperses liquid into powder for fast wetting. Ploughshare mixing (LDH) combines fast blending with optional chopper action for breaking up wet clumps. Conical screw and ribbon-screw designs give efficient wet blending in a compact footprint before downstream granulation or drying.
