Secador de convección
Los secadores de convección proporcionan un secado rápido y uniforme mediante contacto directo entre aire caliente y material — configuraciones de atomización, flash, lecho fluidizado, banda y bandejas para producción continua en múltiples sectores.
Secador por Atomización Centrífuga LPG
Categorías: Secador de convección, Secador por atomización
Advanced Liquid-to-Powder Process:
A high-speed centrifugal atomizer at the tower's peak transforms materials into super fine liquid drops that dry quickly upon contact with hot air — perfect for precise particle size, moisture, density and shape standards.
- Input:
- Solutions, Emulsions, Suspensions
- Output:
- Powder with 3%-5% moisture content
- Temperature:
- Inlet air temperature range of 150°C to 500°C
YPG-Secador por Aspersión a Presión
Categorías: Secador de convección, Secador por atomización
High-Pressure Nozzle Atomization:
The Pressure Spray Dryer atomizes feed liquid through high-pressure nozzles, producing coarser and denser granules with excellent flowability — widely used for foods, chemicals and dairy powders.
- Input:
- Solutions, Emulsions, Suspensions
- Output:
- Coarse powder or granules with 3%-5% moisture content
- Temperature:
- Inlet air temperature range of 150°C to 350°C
Secador de Bandejas CTC
Categorías: Secador de convección
Hot Air Circulation Batch Drying:
The Hot Air Circulation Tray Dryer warms materials evenly on trays with forced hot-air circulation. Simple, reliable batch drying for granules, powders, herbs and food ingredients.
- Input:
- Granules, Powders, Herbs, Sliced Materials
- Output:
- Dried solids with uniform moisture content
- Temperature:
- Hot air temperature ≤140°C
XSG-Secador Spin Flash
Categorías: Secador de convección, Secador flash
One-Step Continuous Flash Drying:
The Spin Flash Dryer dries pastes and filter cakes in a single continuous step. Hot air and mechanical agitation break up material while drying — no pre-crushing needed.
- Input:
- Pastes, Filter Cakes, Thick Slurries
- Output:
- Powder with 3%-8% moisture content
- Temperature:
- Inlet air temperature range of 150°C to 350°C
Secador de Banda DW
Categorías: Secador de convección
Continuous Convection Dryer with Mesh Belt:
The Belt Dryer can be configured with single or multiple mesh-belt layers, spreading material evenly for directional hot-air drying. Belt speed adjusts to each material's temperature and moisture content, so it runs at comparatively low temperatures while continuously processing large batches.
- Input:
- Permeable solids in sheets, strips, granules or blocks
- Output:
- Sheet, strip, granule or block solids with 3%–8% moisture content
- Temperature:
- Inlet air temperature < 200°C
- Additional Feature:
- Cooling
ZLG-Secador de Lecho Fluidizado Vibratorio Horizontal
Categorías: Secador de convección, Secador de lecho fluidizado, Secador vibratorio
Continuous Drying Solution for Granular Materials:
Operating on the principle of fluidization combined with vibration, the Vibrating Fluid Bed Dryer processes granules by circulating them on heated air that dries them evenly. This approach minimizes surface damage, prevents pollution thanks to its enclosed design, and gives granules time to settle — facilitating stable, continuous production.
- Input:
- Granules with moisture content < 20%
- Output:
- Granules with 1%–5% moisture content
- Temperature:
- Inlet air temperature < 200°C
- Additional Feature:
- Cooling
HZG-Horno Rotatorio
Categorías: Secador de convección
Perfect for Large-Scale, Continuous Drying:
Wet material enters at one end of the Rotary Kiln, where internal flights agitate it and blend it thoroughly with hot air. This elongated drum dryer, spanning many metres, can process hundreds of tons per hour, and its drum speed adjusts from 1 to 10 RPM to suit different requirements.
- Input:
- Granular materials
- Output:
- Granules with 3%–5% moisture content
- Temperature:
- Inlet air temperature range of 40°C to 350°C
- Additional Feature:
- Mixing
Secador por Atomización de Circulación Cerrada GXP
Categorías: Secador de convección, Secador por atomización
Optimal Drying for Sensitive Materials:
This explosion-proof spray dryer operates in a sealed environment, using inert gas as the drying medium to fully recover solvents from raw materials. The recyclable drying medium provides superior protection for sensitive materials.
- Input:
- Solutions, Emulsions, Suspensions
- Output:
- Powder with 3%–8% moisture content
- Temperature:
- Inlet air temperature range of 100°C to 300°C
- Suitability:
- Anaerobic, explosion-proof and low-temperature conditions
ZLPG-Secador por Atomización de Extractos
Categorías: Secador de convección, Secador por atomización
Specialized Spray Dryer for Extracts:
The Extract Spray Dryer features a cylinder equipped with a cooling system specifically designed for drying extracts while keeping wall temperatures below 80°C. It includes an airbrush that cleans the walls during operation to prevent adhesion and protect the powder from burning.
- Input:
- Extracts (Liquid)
- Output:
- Extracts (Powder) with 3%–8% moisture content
- Temperature:
- Inlet air temperature range of 140°C to 180°C
- Additional Features:
- Freeze dehumidification, Air brush for tower cleaning
Secador Neumático Flash
Categorías: Secador de convección, Secador flash
Integrated Handling for Heat-Sensitive, Loose Solid Materials:
Designed for temperature-sensitive and slightly viscous materials, this equipment offers a wide range of uses for loose solid materials. Its modular design allows drying and grinding stages to be added to meet varying customer requirements.
- Input:
- Non-viscous, loose solid materials
- Output:
- Powder, granules, with 3%–6% moisture content
- Temperature:
- Inlet temperature < 200°C
- Additional Feature:
- Grinding
FG-Secador de Lecho Fluidizado Vertical
Categorías: Secador de convección, Secador de lecho fluidizado
Solution for Batch Drying of Granules and Powder:
The Vertical Fluid Bed Dryer fluidizes materials with an upward air stream that promotes contact for quick drying or cooling. Designed specifically for batch production, it allows taller bed heights than horizontal fluidized bed dryers and is commonly paired with wet granulation machines.
- Input:
- Powders and Granules, moisture < 20%
- Output:
- Powders and Granules, moisture 3%–5%
- Temperature:
- Inlet air temperature < 100°C
- Additional Feature:
- Convertible to a spray fluidized bed granulator
XF-Secador de Lecho Fluidizado Horizontal
Categorías: Secador de convección, Secador de lecho fluidizado
Versatile Continuous Drying for Granules and Powder:
The Horizontal Fluidized Bed Dryer aerates damp materials with an upward air stream to dry or cool them. Built for continuous manufacturing, it offers residence times from a few seconds to minutes, ensuring effective processing.
- Input:
- Powders and Granules, moisture < 20%
- Output:
- Powders and Granules, moisture 3%–5%
- Temperature:
- Inlet air temperature < 100°C
- Additional Feature:
- Cooling
GFG-Secador de Lecho Fluidizado Vertical con Mezclado
Categorías: Secador de convección, Secador de lecho fluidizado
Fluidized Bed Drying with Built-In Mixing:
The Vertical Blending Fluidized Bed Dryer is equipped with a mixing mechanism that helps form a fluidized bed inside the vessel when handling heavy loads. Ideal for mass production, it can process thick materials and is typically paired with wet granulation setups.
- Input:
- Powder and Granules, moisture < 20%
- Output:
- Powder and Granules, moisture 3%–5%
- Temperature:
- Inlet air temperature < 100°C
- Additional Feature:
- Stirring, Cooling
Secador Vibratorio Espiral LZG
Categorías: Secador de convección, Secador vibratorio
Method for Drying Pellets and Granules:
The Spiral Vibrating Dryer dries materials by using centrifugal vibration and gravity to move them in a bouncing path from top to bottom along a spiral bed. Fresh hot air enters from below, interacting thoroughly with the material for heat and mass transfer before leaving through the top — ensuring even drying.
- Input:
- Granular, short-rod and spherical solids with < 20% moisture
- Output:
- Granules, short rods and spheres with 3%–5% moisture
- Temperature:
- Inlet air temperature < 100°C
- Additional Feature:
- Cooling
Catorce secadores de convección para producción continua
La gama de convección de SINOTHERMO abarca el secado por atomización centrífuga y a presión, el secado en bandejas y banda con aire caliente, el secado spin-flash y flash neumático, el secado en lecho fluidizado horizontal y vertical, el procesamiento en horno rotatorio y el secado en lecho vibratorio — todo ello basado en el contacto directo con aire caliente para una operación continua y de alto rendimiento.
Cómo elegir un secador de convección según el tipo de alimentación
Las alimentaciones líquidas se atomizan en secadores por aspersión (LPG, YPG, GXP, ZLPG) hasta convertirse en polvo fino y seco. Las tortas húmedas y pastas pasan por secadores flash (XSG, Neumático) para una eliminación de humedad en cuestión de segundos. Los sólidos granulares y en polvo se fluidizan en secadores de lecho (FG, XF, GFG, ZLG) para un secado continuo y uniforme. Los sólidos a granel se desplazan por secadores de banda (DW), bandejas (CT-C), horno rotatorio (HZG) o vibratorios (LZG) según el rendimiento y el tiempo de residencia necesarios.
Explorar más
