Productos químicos
Productos químicos es el sector más amplio de SINOTHERMO, y abarca secadores al vacío, de convección y de lecho fluidizado, mezcladores, granuladores y pulverizadores para productos químicos a granel, productos químicos especializados e intermedios. La gama cubre desde materiales sensibles a solventes que requieren secado a prueba de explosión con circulación cerrada, hasta polvos minerales abrasivos que necesitan reducción de tamaño de gruesa a fina y mezclado de alta cizalla.
Secador CD
Categorías: Secador de conducción y vacío
Continuous Drying for Liquid and Paste-like Materials:
The CD Dryer is designed for continuous drying of liquids and pastes. Utilizing indirectly heated discs, the dryer efficiently transfers heat to the material, creating a thin layer for rapid evaporation. This method ensures effective drying and consistent product quality.
- Input:
- Liquid and Pasty Materials
- Output:
- Dried Solids (flake or powder, depending on application)
- Heat Transfer Coefficient:
- Overall heat transfer coefficient: 2,300W/m²k
- Thermal Efficiency:
- 80 to 85% thermal efficiency
Secador por Atomización Centrífuga LPG
Categorías: Secador de convección, Secador por atomización
Advanced Liquid-to-Powder Process:
A high-speed centrifugal atomizer at the tower's peak transforms materials into super fine liquid drops that dry quickly upon contact with hot air — perfect for precise particle size, moisture, density and shape standards.
- Input:
- Solutions, Emulsions, Suspensions
- Output:
- Powder with 3%-5% moisture content
- Temperature:
- Inlet air temperature range of 150°C to 500°C
YPG-Secador por Aspersión a Presión
Categorías: Secador de convección, Secador por atomización
High-Pressure Nozzle Atomization:
The Pressure Spray Dryer atomizes feed liquid through high-pressure nozzles, producing coarser and denser granules with excellent flowability — widely used for foods, chemicals and dairy powders.
- Input:
- Solutions, Emulsions, Suspensions
- Output:
- Coarse powder or granules with 3%-5% moisture content
- Temperature:
- Inlet air temperature range of 150°C to 350°C
XSG-Secador Spin Flash
Categorías: Secador de convección, Secador flash
One-Step Continuous Flash Drying:
The Spin Flash Dryer dries pastes and filter cakes in a single continuous step. Hot air and mechanical agitation break up material while drying — no pre-crushing needed.
- Input:
- Pastes, Filter Cakes, Thick Slurries
- Output:
- Powder with 3%-8% moisture content
- Temperature:
- Inlet air temperature range of 150°C to 350°C
ZPG-Secador de Rastrillo al Vacío
Categorías: Secador de conducción y vacío
Rake Agitator Vacuum Conduction Dryer:
The Rake Dryer comes with a large-area jacket heating system and a rake agitator that increases the heating surface area, making it easier to move and heat materials. Operating under vacuum, it is perfect for handling flammable, organic solvent-based and heat-sensitive materials.
- Input:
- Pastes, Slurries, Viscous Materials
- Output:
- Powder with 3%-8% moisture content
- Temperature:
- Heat source temperature <150°C
KJG-Secador de Paletas al Vacío
Categorías: Secador de conducción y vacío
Vacuum Conduction Dryer with Hollow Paddle Agitator:
With its heating surface and wedge-shaped hollow paddle agitators, the Vacuum Paddle Dryer outperforms conventional rake vacuum dryers in heating effectiveness. It aids in the movement and heating of materials under vacuum, suitable for flammable, explosive, organic solvent-based and heat-sensitive materials.
- Input:
- Liquids, Slurries, Pastes, Mashes
- Output:
- Powder with 3%-10% moisture content
- Temperature:
- Heat source temperature range of 50°C to 200°C
- Additional Feature:
- Mixing, Mild Crushing
PLG-Secador de Platos Vertical al Vacío
Categorías: Secador de conducción y vacío
Effective Continuous Vacuum Conduction Dryer:
The Vacuum Plate Dryer incorporates discs for efficient heating, providing a generous heating surface in a compact layout. It excels in vacuum operations, ideal for managing flammable, explosive and heat-sensitive materials.
- Input:
- Loose powder, Granules
- Output:
- Powder, Granules with 3%-8% moisture content
- Temperature:
- Heat source temperature <200°C
SZG-Secador Rotatorio de Vacío de Doble Cono
Categorías: Secador de conducción y vacío
Dependable Vacuum Conduction Drying Solution:
The Double Cone Rotary Vacuum Dryer includes a heating system and an interior free of dead angles, making it highly adaptable. With its barrel rotation it effectively blends the contents — suitable for low-temperature vacuum operation with organic solvent-based and heat-sensitive materials.
- Input:
- Powders, Granules
- Output:
- Powder with 3%-5% moisture content
- Temperature:
- Heat source temperature <150°C
- Additional Feature:
- Rotating blending
Secador al Vacío Cónico de Cinta DZLG
Categorías: Secador de conducción y vacío
Conical Vacuum Dryer with Hollow Ribbon Technology:
With its jacket and ribbon design, the Conical Vacuum Dryer provides a large heating surface, efficient material loading and smooth discharge without any dead angles. The ribbon facilitates mixing for heating and blending — perfect for low-temperature vacuum conditions with explosive and heat-sensitive materials.
- Input:
- Loose powdery, granular solids
- Output:
- Powder with 3%-5% moisture content
- Temperature:
- Heat source temperature <200°C
- Additional Feature:
- Stirring and mixing
Mezclador de Tornillo Cónico DSH
Categorías: Mezclador, Mezclador cónico, Mezclador de tornillo
Gentle Conical Screw Blending:
The Conical Screw Mixer combines a rotating screw with a conical vessel for gentle, low-shear blending of powders and granules — fast discharge with minimal residue.
- Input:
- Powders, Granules
- Output:
- Homogeneous blends
- Additional Feature:
- Fast discharge, minimal residue
Secador de Banda DW
Categorías: Secador de convección
Continuous Convection Dryer with Mesh Belt:
The Belt Dryer can be configured with single or multiple mesh-belt layers, spreading material evenly for directional hot-air drying. Belt speed adjusts to each material's temperature and moisture content, so it runs at comparatively low temperatures while continuously processing large batches.
- Input:
- Permeable solids in sheets, strips, granules or blocks
- Output:
- Sheet, strip, granule or block solids with 3%–8% moisture content
- Temperature:
- Inlet air temperature < 200°C
- Additional Feature:
- Cooling
Recubridora Granuladora de Lecho Fluidizado Wurster FLP
Categorías: Granulador y extrusor, Granulador de lecho fluidizado
All-in-One Mixing, Granulating, Coating, and Drying:
After the main material forms a fluidized bed at the bottom, granules are created with the aid of adhesive sprayed from the top nozzles in the granulating chamber. Subsequently, coating material is sprayed onto the granules from bottom or side nozzles within the chamber for effective coating.
- Input:
- Main ingredient as powder (for granulation) or granules and pellets (for coating), with adhesive or coating material in liquid form
- Output:
- Solid medium-sized granules with 3%–5% moisture content
- Type:
- Spray Fluidized Bed, Wet Granulation
- Additional Features:
- Mixing, Coating, Drying, Cooling
ZLG-Secador de Lecho Fluidizado Vibratorio Horizontal
Categorías: Secador de convección, Secador de lecho fluidizado, Secador vibratorio
Continuous Drying Solution for Granular Materials:
Operating on the principle of fluidization combined with vibration, the Vibrating Fluid Bed Dryer processes granules by circulating them on heated air that dries them evenly. This approach minimizes surface damage, prevents pollution thanks to its enclosed design, and gives granules time to settle — facilitating stable, continuous production.
- Input:
- Granules with moisture content < 20%
- Output:
- Granules with 1%–5% moisture content
- Temperature:
- Inlet air temperature < 200°C
- Additional Feature:
- Cooling
Granulador Extrusor de Tornillo SET
Categorías: Granulador y extrusor
Wet Granulation with Screw Extrusion Process:
By utilizing an extrusion process, this wet-granulation machine leverages the self-viscosity of a solid-liquid dispersion to bond powder particles, producing granules of consistent shape and size. The screw-extrusion mechanism generates enough force to form pellets without always requiring a binder — particularly suitable for high-viscosity materials. Optional water cooling is available.
- Input:
- Solid-liquid mixture (predominantly solid)
- Output:
- Moist cylindrical granules
- Type:
- Extrusion Granulation, Wet Granulation
GHL-Granulador de Mezcla Húmeda Rápida
Categorías: Granulador y extrusor
Cutting-Edge Wet Granulation Technology:
A paddle at the base swiftly mixes powders and sticky binders within a cylindrical bowl, while a rapid chopper on the side breaks the mixture into wet granules to prevent clumping. This fast process combines mixing and granule formation within minutes, and the Wet Rapid Mixing Granulator can provide heating or cooling as needed.
- Input:
- Main material in powder form, binding agent as paste
- Output:
- Solid, loose granules with approximately 15% moisture content
- Type:
- Mixing Granulation, Wet Granulation
- Additional Features:
- Mixing, Mild Crushing, Heating, Cooling
Mezclador de Tambor Rotatorio
Categorías: Mezclador, Mezclador rotatorio
Innovative Multi-Axis Motion Rotary Drum Mixer:
The Rotary Drum Mixer transforms the mixing process by moving and combining motions on the x, y and z axes. This method guarantees thorough mixing of powders and granules with simplicity and effectiveness, making it an ideal choice for dry-mixing applications.
- Input:
- Solid powders, Granules
- Type:
- Dry Mixing
Molino de Martillos
Categorías: Pulverizador
Versatile Pulverizing Technology:
With its versatile pulverizing technology, the Hammer Mill finds applications across industries. Its adaptable design features customizable blades, collection systems, cooling mechanisms and dust-removal systems, making it suitable for processing a wide range of materials.
- Input:
- Brittle solids (< 15mm)
- Output:
- 50 to 150 mesh
CSJ-Pulverizador Grueso
Categorías: Pulverizador
Primary Crushing Solution:
Typically used for processing hard, large-sized solid materials, the Coarse Pulverizer effectively serves as a preliminary step before further fine pulverization, optimizing subsequent crushing processes.
- Input:
- Brittle Solids (< 100mm)
- Output:
- 0.5 to 20 mesh
WFJ-Pulverizador de Impacto
Categorías: Pulverizador
Optimal Choice for Ultra-Fine Granularity:
The Impact Pulverizer grinds materials to a particle size of 400 mesh or even finer, streamlining manufacturing processes. It can additionally be equipped with a cyclone collector and bag-type dust remover for cleaner processing.
- Input:
- Brittle Solids (up to 10mm)
- Output:
- 80 to 450 mesh
HZG-Horno Rotatorio
Categorías: Secador de convección
Perfect for Large-Scale, Continuous Drying:
Wet material enters at one end of the Rotary Kiln, where internal flights agitate it and blend it thoroughly with hot air. This elongated drum dryer, spanning many metres, can process hundreds of tons per hour, and its drum speed adjusts from 1 to 10 RPM to suit different requirements.
- Input:
- Granular materials
- Output:
- Granules with 3%–5% moisture content
- Temperature:
- Inlet air temperature range of 40°C to 350°C
- Additional Feature:
- Mixing
Secador de Tambor Raspador al Vacío HG/GT
Categorías: Secador de conducción y vacío
Continuous Drying for Paste-like Materials:
In operation, the rotating drum picks up material as a thin film. Heat transfers from the inner to the outer wall, effectively evaporating moisture, while an internal scraper continuously converts the dried film into flake-like product in a short time.
- Input:
- Pasty, Viscous and Thick Materials
- Output:
- Flake-like Solids with 5%–8% moisture content
- Temperature:
- Inlet air temperature range of 120°C to 260°C
- Additional Feature:
- Cooling
Secador por Atomización de Circulación Cerrada GXP
Categorías: Secador de convección, Secador por atomización
Optimal Drying for Sensitive Materials:
This explosion-proof spray dryer operates in a sealed environment, using inert gas as the drying medium to fully recover solvents from raw materials. The recyclable drying medium provides superior protection for sensitive materials.
- Input:
- Solutions, Emulsions, Suspensions
- Output:
- Powder with 3%–8% moisture content
- Temperature:
- Inlet air temperature range of 100°C to 300°C
- Suitability:
- Anaerobic, explosion-proof and low-temperature conditions
Secador Neumático Flash
Categorías: Secador de convección, Secador flash
Integrated Handling for Heat-Sensitive, Loose Solid Materials:
Designed for temperature-sensitive and slightly viscous materials, this equipment offers a wide range of uses for loose solid materials. Its modular design allows drying and grinding stages to be added to meet varying customer requirements.
- Input:
- Non-viscous, loose solid materials
- Output:
- Powder, granules, with 3%–6% moisture content
- Temperature:
- Inlet temperature < 200°C
- Additional Feature:
- Grinding
FG-Secador de Lecho Fluidizado Vertical
Categorías: Secador de convección, Secador de lecho fluidizado
Solution for Batch Drying of Granules and Powder:
The Vertical Fluid Bed Dryer fluidizes materials with an upward air stream that promotes contact for quick drying or cooling. Designed specifically for batch production, it allows taller bed heights than horizontal fluidized bed dryers and is commonly paired with wet granulation machines.
- Input:
- Powders and Granules, moisture < 20%
- Output:
- Powders and Granules, moisture 3%–5%
- Temperature:
- Inlet air temperature < 100°C
- Additional Feature:
- Convertible to a spray fluidized bed granulator
XF-Secador de Lecho Fluidizado Horizontal
Categorías: Secador de convección, Secador de lecho fluidizado
Versatile Continuous Drying for Granules and Powder:
The Horizontal Fluidized Bed Dryer aerates damp materials with an upward air stream to dry or cool them. Built for continuous manufacturing, it offers residence times from a few seconds to minutes, ensuring effective processing.
- Input:
- Powders and Granules, moisture < 20%
- Output:
- Powders and Granules, moisture 3%–5%
- Temperature:
- Inlet air temperature < 100°C
- Additional Feature:
- Cooling
GFG-Secador de Lecho Fluidizado Vertical con Mezclado
Categorías: Secador de convección, Secador de lecho fluidizado
Fluidized Bed Drying with Built-In Mixing:
The Vertical Blending Fluidized Bed Dryer is equipped with a mixing mechanism that helps form a fluidized bed inside the vessel when handling heavy loads. Ideal for mass production, it can process thick materials and is typically paired with wet granulation setups.
- Input:
- Powder and Granules, moisture < 20%
- Output:
- Powder and Granules, moisture 3%–5%
- Temperature:
- Inlet air temperature < 100°C
- Additional Feature:
- Stirring, Cooling
FL-Granulador de Lecho Fluidizado
Categorías: Granulador y extrusor, Granulador de lecho fluidizado
All-in-One Mixing, Granulating, and Drying:
Materials form a fluidized bed at the bottom, where granules are created in the granulation chamber with the help of spray nozzles dispensing binder. The hopper allows several raw materials to be added and mixed during the fluidization process.
- Input:
- Main ingredient as powder, adhesive in liquid form
- Output:
- Solid medium-sized granules with 3%–5% moisture content
- Type:
- Spray Fluidized Bed, Wet Granulation
- Additional Features:
- Mixing, Drying, Cooling
Secador Vibratorio Espiral LZG
Categorías: Secador de convección, Secador vibratorio
Method for Drying Pellets and Granules:
The Spiral Vibrating Dryer dries materials by using centrifugal vibration and gravity to move them in a bouncing path from top to bottom along a spiral bed. Fresh hot air enters from below, interacting thoroughly with the material for heat and mass transfer before leaving through the top — ensuring even drying.
- Input:
- Granular, short-rod and spherical solids with < 20% moisture
- Output:
- Granules, short rods and spheres with 3%–5% moisture
- Temperature:
- Inlet air temperature < 100°C
- Additional Feature:
- Cooling
Mezclador en V
Categorías: Mezclador, Mezclador rotatorio
Multifunctional and Efficient Blender:
The V Blender's unique V-shaped chamber and rotation use gravity to gently mix materials, ensuring even distribution without damage.
- Input:
- Solid powders, Granules
- Type:
- Dry Mixing
Mezclador de Doble Cono
Categorías: Mezclador, Mezclador cónico, Mezclador rotatorio
Mixer with Multiple Motion Options:
Available in single-cone or double-cone designs, the Double Cone Blender features a sealed chamber that rocks back and forth along the X axis in repeated cycles to mix materials, ensuring high-quality results.
- Input:
- Solid Powders, Granules
- Type:
- Dry Mixing
GHJ-Mezclador de alta velocidad
Categorías: Mezclador
Rapid Mixing Capability:
By using high-speed chopper blades positioned on the sides of the machine, the High Speed Mixer stirs materials and boosts their movement, enhancing mixing efficiency. The collaborative action of these blades gives consistent blending, with each blend taking only a few minutes.
- Input:
- Powders, Granules, Minor Liquids
- Type:
- Dry Mixing, Mild Wet Mixing
- Additional Features:
- Mild Crushing
Mezclador CH-Sigma
Categorías: Mezclador, Mezclador horizontal
Straightforward Design, Eliminating Awkward Corners:
The Sigma Mixer comes with a trough-shaped mixing chamber and sigma-shaped paddles mounted on the shaft, providing both sealing and mixing capabilities. Perfect for blending powders, granules and small amounts of liquid.
- Input:
- Powders, Granules, Small Amounts of Liquid
- Type:
- Dry Mixing, Mild Wet Mixing
Mezclador de Reja de Arado LDH
Categorías: Mezclador, Mezclador horizontal
Great for Processing Materials That Require Breaking Down:
The Ploughshare Mixer consists of a transmission system, a cylinder, ploughshares and flying blades. The ploughshares promote movement along the cylinder wall while high-speed flying blades disperse materials efficiently, ensuring quick and even mixing.
- Input:
- Powders, Granules, Small amounts of liquids
- Type:
- Dry Mixing, Mild Wet Mixing
- Additional Feature:
- Mild Crushing
WLDH-Mezclador de Cinta Horizontal
Categorías: Mezclador, Mezclador horizontal, Mezclador de cinta
Equipped with Horizontal Screw Belts:
The Horizontal Ribbon Mixer offers efficient material blending. Its cylinder holds a shaft with surrounding ribbon belts that rotate at equal speed: the outer belts move material from both ends toward the center while the inner belts move it from the center back out, folding the batch together for thorough mixing.
- Input:
- Powders, Granules, Small amounts of liquid
- Type:
- Dry Mixing, Mild Wet Mixing
DLH-Mezclador Cónico de Tornillo y Cinta
Categorías: Mezclador, Mezclador cónico, Mezclador de cinta, Mezclador de tornillo
Equipped with Rotating Spiral Belt:
A screw encased in a ribbon rotates simultaneously to create a swirling motion, lifting material upward in a spiral from the base of the cone before it descends by gravity. Optional features such as spray atomization and jacket heating or cooling are also available.
- Input:
- Solids, Powders, Granules, Liquids
- Type:
- Dry Mixing, Wet Mixing
- Additional Features:
- Humidifying, Drying, Cooling
Granulador Oscilante YK
Categorías: Granulador y extrusor
Efficient, Versatile Oscillating Granulator:
The Oscillating Granulator uses a special back-and-forth motion to softly turn moist powder into even, round granules. Variable oscillation frequency and amplitude allow precise control of particle size and density, in a compact design with simple operation and low maintenance requirements.
- Input:
- Moist powder mixed with a binder
- Output:
- Wet cylindrical granules
- Type:
- Dry Granulation, Wet Granulation
- Additional Feature:
- Mixing
ZLB-Granulador de Cesta
Categorías: Granulador y extrusor
Efficient Wet Extrusion Granulator:
Moist powder is pushed through a mesh by rotating blades during extrusion to form quality granules. The Basket Granulator offers steady granulation rates, visually appealing particles, an automated discharge process and high output levels.
- Input:
- Moist powder mixed with a binder
- Output:
- Wet cylindrical granules
- Type:
- Extrusion Granulation, Wet Granulation
- Additional Feature:
- Mixing
Granulador de Compresión en Seco GKDH
Categorías: Granulador y extrusor
Additive-Free Dry Granulation Process:
Dry raw materials are compressed under pressure to form solid flakes, which are then processed into granules of the desired size — forming granules through pressure alone, with no liquid binder or added moisture.
- Input:
- Powder
- Output:
- Solid Granules
- Type:
- Dry Granulation
- Additional Features:
- Crushing, Screening
ZYG-Secador Horizontal de Disco al Vacío
Categorías: Secador de conducción y vacío
Vacuum Conduction Dryer with Hollow Disc Stirrers:
The Vacuum Horizontal Disc Dryer has a large-area jacket for heating and hollow disc stirrers that enhance the heating surface. It performs better than rake and paddle vacuum dryers in heating efficiency for many materials, is suited to low-temperature vacuum operation, and is ideal for handling flammable, explosive, organic-solvent-based and heat-sensitive materials.
- Input:
- Liquids, Slurries, Pastes, and Mashes
- Output:
- Powder with 3%–10% moisture content
- Temperature:
- Heat source temperature 50°C to 200°C
- Additional Feature:
- Stirring, Mild Crushing
Liofilizador de Armario
Categorías: Liofilizador, Liofilizador industrial
State-of-the-Art Cabinet Freeze Dryer for Industrial Use:
This Cabinet Freeze Dryer is crafted to extract moisture efficiently from a wide array of products. Using a freeze-drying technique, it lowers temperatures to optimal levels and converts moisture directly from solid to vapor — ensuring top-notch preservation and quality without a liquid phase.
- Input:
- Pharmaceutical ingredients, food products, chemical compounds
- Output:
- Stably dried and preserved materials
- Temperature:
- -50°C to -80°C
Equipos que abarcan toda la cadena de procesos químicos
Los secadores al vacío procesan intermedios químicos sensibles a solventes y al calor; los secadores de convección y de lecho fluidizado procesan polvos a granel a escala; los mezcladores combinan formulaciones químicas, desde polvos de flujo libre hasta pastas viscosas; los pulverizadores y granuladores gestionan el control del tamaño de partícula en ambos extremos del proceso.
Necesidades comunes del procesamiento químico que cubre esta gama
Secado a prueba de explosión con circulación cerrada para solventes orgánicos y materiales inflamables. Opciones de construcción resistentes a la corrosión para alimentaciones químicas agresivas. Mezclado de alta cizalla para pastas viscosas junto con mezclado suave para polvos de flujo libre. Reducción de tamaño, desde la trituración gruesa hasta la pulverización fina a nivel micrométrico.
Explorar más
Pharmaceuticals →
Un sector estrechamente relacionado con necesidades de secado y granulación superpuestas.
Spices and Flavorings →
Comparte equipos de extracción y procesamiento en lecho fluidizado con el procesamiento químico.
Animal Feed and Pet Food →
Comparte equipos de granulación y mezclado utilizados en la formulación química.
