Medio ambiente
Medio ambiente abarca los secadores de paletas al vacío y de tambor raspador, el horno rotatorio y el pulverizador de SINOTHERMO utilizados para procesar lodos, corrientes de residuos y materiales subproducto. Estas configuraciones reducen el volumen y la humedad para facilitar la eliminación, gestionan pastas de residuos viscosas y permiten el tratamiento de residuos a alta temperatura y la recuperación de materiales.
Secador CD
Categorías: Secador de conducción y vacío
Continuous Drying for Liquid and Paste-like Materials:
The CD Dryer is designed for continuous drying of liquids and pastes. Utilizing indirectly heated discs, the dryer efficiently transfers heat to the material, creating a thin layer for rapid evaporation. This method ensures effective drying and consistent product quality.
- Input:
- Liquid and Pasty Materials
- Output:
- Dried Solids (flake or powder, depending on application)
- Heat Transfer Coefficient:
- Overall heat transfer coefficient: 2,300W/m²k
- Thermal Efficiency:
- 80 to 85% thermal efficiency
KJG-Secador de Paletas al Vacío
Categorías: Secador de conducción y vacío
Vacuum Conduction Dryer with Hollow Paddle Agitator:
With its heating surface and wedge-shaped hollow paddle agitators, the Vacuum Paddle Dryer outperforms conventional rake vacuum dryers in heating effectiveness. It aids in the movement and heating of materials under vacuum, suitable for flammable, explosive, organic solvent-based and heat-sensitive materials.
- Input:
- Liquids, Slurries, Pastes, Mashes
- Output:
- Powder with 3%-10% moisture content
- Temperature:
- Heat source temperature range of 50°C to 200°C
- Additional Feature:
- Mixing, Mild Crushing
Secador de Banda DW
Categorías: Secador de convección
Continuous Convection Dryer with Mesh Belt:
The Belt Dryer can be configured with single or multiple mesh-belt layers, spreading material evenly for directional hot-air drying. Belt speed adjusts to each material's temperature and moisture content, so it runs at comparatively low temperatures while continuously processing large batches.
- Input:
- Permeable solids in sheets, strips, granules or blocks
- Output:
- Sheet, strip, granule or block solids with 3%–8% moisture content
- Temperature:
- Inlet air temperature < 200°C
- Additional Feature:
- Cooling
CSJ-Pulverizador Grueso
Categorías: Pulverizador
Primary Crushing Solution:
Typically used for processing hard, large-sized solid materials, the Coarse Pulverizer effectively serves as a preliminary step before further fine pulverization, optimizing subsequent crushing processes.
- Input:
- Brittle Solids (< 100mm)
- Output:
- 0.5 to 20 mesh
HZG-Horno Rotatorio
Categorías: Secador de convección
Perfect for Large-Scale, Continuous Drying:
Wet material enters at one end of the Rotary Kiln, where internal flights agitate it and blend it thoroughly with hot air. This elongated drum dryer, spanning many metres, can process hundreds of tons per hour, and its drum speed adjusts from 1 to 10 RPM to suit different requirements.
- Input:
- Granular materials
- Output:
- Granules with 3%–5% moisture content
- Temperature:
- Inlet air temperature range of 40°C to 350°C
- Additional Feature:
- Mixing
Secador de Tambor Raspador al Vacío HG/GT
Categorías: Secador de conducción y vacío
Continuous Drying for Paste-like Materials:
In operation, the rotating drum picks up material as a thin film. Heat transfers from the inner to the outer wall, effectively evaporating moisture, while an internal scraper continuously converts the dried film into flake-like product in a short time.
- Input:
- Pasty, Viscous and Thick Materials
- Output:
- Flake-like Solids with 5%–8% moisture content
- Temperature:
- Inlet air temperature range of 120°C to 260°C
- Additional Feature:
- Cooling
Secador Neumático Flash
Categorías: Secador de convección, Secador flash
Integrated Handling for Heat-Sensitive, Loose Solid Materials:
Designed for temperature-sensitive and slightly viscous materials, this equipment offers a wide range of uses for loose solid materials. Its modular design allows drying and grinding stages to be added to meet varying customer requirements.
- Input:
- Non-viscous, loose solid materials
- Output:
- Powder, granules, with 3%–6% moisture content
- Temperature:
- Inlet temperature < 200°C
- Additional Feature:
- Grinding
Secado y reducción de tamaño para el procesamiento ambiental
El secador de paletas al vacío KJG y el secador de tambor raspador al vacío HG/GT gestionan el secado de lodos y corrientes de residuos, el secador CD y el secador de banda procesan materiales ambientales a granel, el horno rotatorio se encarga del tratamiento de residuos a alta temperatura, y el pulverizador de trituración gruesa reduce el material de desecho a un tamaño de partícula manejable.
Aplicaciones en el procesamiento ambiental
El secado por paletas al vacío reduce el volumen de lodos para facilitar su eliminación o reutilización. El secado por tambor raspador gestiona pastas de residuos viscosas que no fluyen a través de los secadores convencionales. El procesamiento en horno rotatorio es adecuado para el tratamiento de residuos a alta temperatura y la recuperación de materiales. El secado flash neumático ofrece una opción rápida y continua para la eliminación de humedad en corrientes de residuos.
Explorar más
Chemicals →
Comparte equipos de secado y pulverización utilizados en el procesamiento de residuos industriales.
Ceramics →
Comparte la tecnología de horno rotatorio para el procesamiento de materiales a alta temperatura.
Foods →
Comparte equipos de secado aplicables al manejo de subproductos y residuos de la industria alimentaria.
