Produtos químicos
Produtos químicos é o setor mais amplo da SINOTHERMO, abrangendo secadores a vácuo, de convecção e de leito fluidizado, misturadores, granuladores e pulverizadores para produtos químicos a granel, produtos químicos especiais e intermediários. A linha cobre desde materiais sensíveis a solventes que exigem secagem à prova de explosão e em circulação fechada até pós minerais abrasivos que requerem redução de tamanho de grosseira a fina e mistura de alto cisalhamento.
Secador CD
Categorias: Secador de condução e vácuo
Continuous Drying for Liquid and Paste-like Materials:
The CD Dryer is designed for continuous drying of liquids and pastes. Utilizing indirectly heated discs, the dryer efficiently transfers heat to the material, creating a thin layer for rapid evaporation. This method ensures effective drying and consistent product quality.
- Input:
- Liquid and Pasty Materials
- Output:
- Dried Solids (flake or powder, depending on application)
- Heat Transfer Coefficient:
- Overall heat transfer coefficient: 2,300W/m²k
- Thermal Efficiency:
- 80 to 85% thermal efficiency
Secador por Atomização Centrífuga LPG
Categorias: Secador de convecção, Secador por Atomização
Advanced Liquid-to-Powder Process:
A high-speed centrifugal atomizer at the tower's peak transforms materials into super fine liquid drops that dry quickly upon contact with hot air — perfect for precise particle size, moisture, density and shape standards.
- Input:
- Solutions, Emulsions, Suspensions
- Output:
- Powder with 3%-5% moisture content
- Temperature:
- Inlet air temperature range of 150°C to 500°C
YPG-Secador por Aspersão a Pressão
Categorias: Secador de convecção, Secador por Atomização
High-Pressure Nozzle Atomization:
The Pressure Spray Dryer atomizes feed liquid through high-pressure nozzles, producing coarser and denser granules with excellent flowability — widely used for foods, chemicals and dairy powders.
- Input:
- Solutions, Emulsions, Suspensions
- Output:
- Coarse powder or granules with 3%-5% moisture content
- Temperature:
- Inlet air temperature range of 150°C to 350°C
XSG-Secador Spin Flash
Categorias: Secador de convecção, Secador Flash
One-Step Continuous Flash Drying:
The Spin Flash Dryer dries pastes and filter cakes in a single continuous step. Hot air and mechanical agitation break up material while drying — no pre-crushing needed.
- Input:
- Pastes, Filter Cakes, Thick Slurries
- Output:
- Powder with 3%-8% moisture content
- Temperature:
- Inlet air temperature range of 150°C to 350°C
ZPG-Secador de Raspador a Vácuo
Categorias: Secador de condução e vácuo
Rake Agitator Vacuum Conduction Dryer:
The Rake Dryer comes with a large-area jacket heating system and a rake agitator that increases the heating surface area, making it easier to move and heat materials. Operating under vacuum, it is perfect for handling flammable, organic solvent-based and heat-sensitive materials.
- Input:
- Pastes, Slurries, Viscous Materials
- Output:
- Powder with 3%-8% moisture content
- Temperature:
- Heat source temperature <150°C
KJG-Secador de Pás a Vácuo
Categorias: Secador de condução e vácuo
Vacuum Conduction Dryer with Hollow Paddle Agitator:
With its heating surface and wedge-shaped hollow paddle agitators, the Vacuum Paddle Dryer outperforms conventional rake vacuum dryers in heating effectiveness. It aids in the movement and heating of materials under vacuum, suitable for flammable, explosive, organic solvent-based and heat-sensitive materials.
- Input:
- Liquids, Slurries, Pastes, Mashes
- Output:
- Powder with 3%-10% moisture content
- Temperature:
- Heat source temperature range of 50°C to 200°C
- Additional Feature:
- Mixing, Mild Crushing
PLG-Secador de Pratos Vertical a Vácuo
Categorias: Secador de condução e vácuo
Effective Continuous Vacuum Conduction Dryer:
The Vacuum Plate Dryer incorporates discs for efficient heating, providing a generous heating surface in a compact layout. It excels in vacuum operations, ideal for managing flammable, explosive and heat-sensitive materials.
- Input:
- Loose powder, Granules
- Output:
- Powder, Granules with 3%-8% moisture content
- Temperature:
- Heat source temperature <200°C
SZG-Secador Rotativo a Vácuo de Cone Duplo
Categorias: Secador de condução e vácuo
Dependable Vacuum Conduction Drying Solution:
The Double Cone Rotary Vacuum Dryer includes a heating system and an interior free of dead angles, making it highly adaptable. With its barrel rotation it effectively blends the contents — suitable for low-temperature vacuum operation with organic solvent-based and heat-sensitive materials.
- Input:
- Powders, Granules
- Output:
- Powder with 3%-5% moisture content
- Temperature:
- Heat source temperature <150°C
- Additional Feature:
- Rotating blending
DZLG-Secador a Vácuo Cônico de Fita
Categorias: Secador de condução e vácuo
Conical Vacuum Dryer with Hollow Ribbon Technology:
With its jacket and ribbon design, the Conical Vacuum Dryer provides a large heating surface, efficient material loading and smooth discharge without any dead angles. The ribbon facilitates mixing for heating and blending — perfect for low-temperature vacuum conditions with explosive and heat-sensitive materials.
- Input:
- Loose powdery, granular solids
- Output:
- Powder with 3%-5% moisture content
- Temperature:
- Heat source temperature <200°C
- Additional Feature:
- Stirring and mixing
Misturador de Rosca Cônica DSH
Categorias: Misturador, Misturador Cônico, Misturador de Rosca
Gentle Conical Screw Blending:
The Conical Screw Mixer combines a rotating screw with a conical vessel for gentle, low-shear blending of powders and granules — fast discharge with minimal residue.
- Input:
- Powders, Granules
- Output:
- Homogeneous blends
- Additional Feature:
- Fast discharge, minimal residue
DW-Secador de Esteira
Categorias: Secador de convecção
Continuous Convection Dryer with Mesh Belt:
The Belt Dryer can be configured with single or multiple mesh-belt layers, spreading material evenly for directional hot-air drying. Belt speed adjusts to each material's temperature and moisture content, so it runs at comparatively low temperatures while continuously processing large batches.
- Input:
- Permeable solids in sheets, strips, granules or blocks
- Output:
- Sheet, strip, granule or block solids with 3%–8% moisture content
- Temperature:
- Inlet air temperature < 200°C
- Additional Feature:
- Cooling
Revestidora Granuladora de Leito Fluidizado FLP-Wurster
Categorias: Granulador e extrusora, Granulador de Leito Fluidizado
All-in-One Mixing, Granulating, Coating, and Drying:
After the main material forms a fluidized bed at the bottom, granules are created with the aid of adhesive sprayed from the top nozzles in the granulating chamber. Subsequently, coating material is sprayed onto the granules from bottom or side nozzles within the chamber for effective coating.
- Input:
- Main ingredient as powder (for granulation) or granules and pellets (for coating), with adhesive or coating material in liquid form
- Output:
- Solid medium-sized granules with 3%–5% moisture content
- Type:
- Spray Fluidized Bed, Wet Granulation
- Additional Features:
- Mixing, Coating, Drying, Cooling
ZLG-Secador de Leito Fluidizado Vibratório Horizontal
Categorias: Secador de convecção, Secador de Leito Fluidizado, Secador Vibratório
Continuous Drying Solution for Granular Materials:
Operating on the principle of fluidization combined with vibration, the Vibrating Fluid Bed Dryer processes granules by circulating them on heated air that dries them evenly. This approach minimizes surface damage, prevents pollution thanks to its enclosed design, and gives granules time to settle — facilitating stable, continuous production.
- Input:
- Granules with moisture content < 20%
- Output:
- Granules with 1%–5% moisture content
- Temperature:
- Inlet air temperature < 200°C
- Additional Feature:
- Cooling
Granulador Extrusor de Rosca SET
Categorias: Granulador e extrusora
Wet Granulation with Screw Extrusion Process:
By utilizing an extrusion process, this wet-granulation machine leverages the self-viscosity of a solid-liquid dispersion to bond powder particles, producing granules of consistent shape and size. The screw-extrusion mechanism generates enough force to form pellets without always requiring a binder — particularly suitable for high-viscosity materials. Optional water cooling is available.
- Input:
- Solid-liquid mixture (predominantly solid)
- Output:
- Moist cylindrical granules
- Type:
- Extrusion Granulation, Wet Granulation
GHL-Granulador de Mistura Úmida Rápida
Categorias: Granulador e extrusora
Cutting-Edge Wet Granulation Technology:
A paddle at the base swiftly mixes powders and sticky binders within a cylindrical bowl, while a rapid chopper on the side breaks the mixture into wet granules to prevent clumping. This fast process combines mixing and granule formation within minutes, and the Wet Rapid Mixing Granulator can provide heating or cooling as needed.
- Input:
- Main material in powder form, binding agent as paste
- Output:
- Solid, loose granules with approximately 15% moisture content
- Type:
- Mixing Granulation, Wet Granulation
- Additional Features:
- Mixing, Mild Crushing, Heating, Cooling
Misturador de Tambor Rotativo
Categorias: Misturador, Misturador Rotativo
Innovative Multi-Axis Motion Rotary Drum Mixer:
The Rotary Drum Mixer transforms the mixing process by moving and combining motions on the x, y and z axes. This method guarantees thorough mixing of powders and granules with simplicity and effectiveness, making it an ideal choice for dry-mixing applications.
- Input:
- Solid powders, Granules
- Type:
- Dry Mixing
Moinho de Martelo
Categorias: Pulverizador
Versatile Pulverizing Technology:
With its versatile pulverizing technology, the Hammer Mill finds applications across industries. Its adaptable design features customizable blades, collection systems, cooling mechanisms and dust-removal systems, making it suitable for processing a wide range of materials.
- Input:
- Brittle solids (< 15mm)
- Output:
- 50 to 150 mesh
CSJ-Pulverizador de Moagem Grossa
Categorias: Pulverizador
Primary Crushing Solution:
Typically used for processing hard, large-sized solid materials, the Coarse Pulverizer effectively serves as a preliminary step before further fine pulverization, optimizing subsequent crushing processes.
- Input:
- Brittle Solids (< 100mm)
- Output:
- 0.5 to 20 mesh
WFJ-Pulverizador de Impacto
Categorias: Pulverizador
Optimal Choice for Ultra-Fine Granularity:
The Impact Pulverizer grinds materials to a particle size of 400 mesh or even finer, streamlining manufacturing processes. It can additionally be equipped with a cyclone collector and bag-type dust remover for cleaner processing.
- Input:
- Brittle Solids (up to 10mm)
- Output:
- 80 to 450 mesh
HZG-Forno Rotativo
Categorias: Secador de convecção
Perfect for Large-Scale, Continuous Drying:
Wet material enters at one end of the Rotary Kiln, where internal flights agitate it and blend it thoroughly with hot air. This elongated drum dryer, spanning many metres, can process hundreds of tons per hour, and its drum speed adjusts from 1 to 10 RPM to suit different requirements.
- Input:
- Granular materials
- Output:
- Granules with 3%–5% moisture content
- Temperature:
- Inlet air temperature range of 40°C to 350°C
- Additional Feature:
- Mixing
Secador de Raspador de Tambor a Vácuo HG/GT
Categorias: Secador de condução e vácuo
Continuous Drying for Paste-like Materials:
In operation, the rotating drum picks up material as a thin film. Heat transfers from the inner to the outer wall, effectively evaporating moisture, while an internal scraper continuously converts the dried film into flake-like product in a short time.
- Input:
- Pasty, Viscous and Thick Materials
- Output:
- Flake-like Solids with 5%–8% moisture content
- Temperature:
- Inlet air temperature range of 120°C to 260°C
- Additional Feature:
- Cooling
GXP-Secador por Atomização de Circulação Fechada
Categorias: Secador de convecção, Secador por Atomização
Optimal Drying for Sensitive Materials:
This explosion-proof spray dryer operates in a sealed environment, using inert gas as the drying medium to fully recover solvents from raw materials. The recyclable drying medium provides superior protection for sensitive materials.
- Input:
- Solutions, Emulsions, Suspensions
- Output:
- Powder with 3%–8% moisture content
- Temperature:
- Inlet air temperature range of 100°C to 300°C
- Suitability:
- Anaerobic, explosion-proof and low-temperature conditions
Secador Pneumático Flash
Categorias: Secador de convecção, Secador Flash
Integrated Handling for Heat-Sensitive, Loose Solid Materials:
Designed for temperature-sensitive and slightly viscous materials, this equipment offers a wide range of uses for loose solid materials. Its modular design allows drying and grinding stages to be added to meet varying customer requirements.
- Input:
- Non-viscous, loose solid materials
- Output:
- Powder, granules, with 3%–6% moisture content
- Temperature:
- Inlet temperature < 200°C
- Additional Feature:
- Grinding
FG-Secador de Leito Fluidizado Vertical
Categorias: Secador de convecção, Secador de Leito Fluidizado
Solution for Batch Drying of Granules and Powder:
The Vertical Fluid Bed Dryer fluidizes materials with an upward air stream that promotes contact for quick drying or cooling. Designed specifically for batch production, it allows taller bed heights than horizontal fluidized bed dryers and is commonly paired with wet granulation machines.
- Input:
- Powders and Granules, moisture < 20%
- Output:
- Powders and Granules, moisture 3%–5%
- Temperature:
- Inlet air temperature < 100°C
- Additional Feature:
- Convertible to a spray fluidized bed granulator
XF-Secador de Leito Fluidizado Horizontal
Categorias: Secador de convecção, Secador de Leito Fluidizado
Versatile Continuous Drying for Granules and Powder:
The Horizontal Fluidized Bed Dryer aerates damp materials with an upward air stream to dry or cool them. Built for continuous manufacturing, it offers residence times from a few seconds to minutes, ensuring effective processing.
- Input:
- Powders and Granules, moisture < 20%
- Output:
- Powders and Granules, moisture 3%–5%
- Temperature:
- Inlet air temperature < 100°C
- Additional Feature:
- Cooling
GFG-Secador de Leito Fluidizado com Mistura Vertical
Categorias: Secador de convecção, Secador de Leito Fluidizado
Fluidized Bed Drying with Built-In Mixing:
The Vertical Blending Fluidized Bed Dryer is equipped with a mixing mechanism that helps form a fluidized bed inside the vessel when handling heavy loads. Ideal for mass production, it can process thick materials and is typically paired with wet granulation setups.
- Input:
- Powder and Granules, moisture < 20%
- Output:
- Powder and Granules, moisture 3%–5%
- Temperature:
- Inlet air temperature < 100°C
- Additional Feature:
- Stirring, Cooling
FL-Granulador de Leito Fluidizado
Categorias: Granulador e extrusora, Granulador de Leito Fluidizado
All-in-One Mixing, Granulating, and Drying:
Materials form a fluidized bed at the bottom, where granules are created in the granulation chamber with the help of spray nozzles dispensing binder. The hopper allows several raw materials to be added and mixed during the fluidization process.
- Input:
- Main ingredient as powder, adhesive in liquid form
- Output:
- Solid medium-sized granules with 3%–5% moisture content
- Type:
- Spray Fluidized Bed, Wet Granulation
- Additional Features:
- Mixing, Drying, Cooling
LZG-Secador Vibratório Espiral
Categorias: Secador de convecção, Secador Vibratório
Method for Drying Pellets and Granules:
The Spiral Vibrating Dryer dries materials by using centrifugal vibration and gravity to move them in a bouncing path from top to bottom along a spiral bed. Fresh hot air enters from below, interacting thoroughly with the material for heat and mass transfer before leaving through the top — ensuring even drying.
- Input:
- Granular, short-rod and spherical solids with < 20% moisture
- Output:
- Granules, short rods and spheres with 3%–5% moisture
- Temperature:
- Inlet air temperature < 100°C
- Additional Feature:
- Cooling
Misturador em V
Categorias: Misturador, Misturador Rotativo
Multifunctional and Efficient Blender:
The V Blender's unique V-shaped chamber and rotation use gravity to gently mix materials, ensuring even distribution without damage.
- Input:
- Solid powders, Granules
- Type:
- Dry Mixing
Misturador de Cone Duplo
Categorias: Misturador, Misturador Cônico, Misturador Rotativo
Mixer with Multiple Motion Options:
Available in single-cone or double-cone designs, the Double Cone Blender features a sealed chamber that rocks back and forth along the X axis in repeated cycles to mix materials, ensuring high-quality results.
- Input:
- Solid Powders, Granules
- Type:
- Dry Mixing
GHJ-Misturador de Alta Velocidade
Categorias: Misturador
Rapid Mixing Capability:
By using high-speed chopper blades positioned on the sides of the machine, the High Speed Mixer stirs materials and boosts their movement, enhancing mixing efficiency. The collaborative action of these blades gives consistent blending, with each blend taking only a few minutes.
- Input:
- Powders, Granules, Minor Liquids
- Type:
- Dry Mixing, Mild Wet Mixing
- Additional Features:
- Mild Crushing
Misturador CH-Sigma
Categorias: Misturador, Misturador Horizontal
Straightforward Design, Eliminating Awkward Corners:
The Sigma Mixer comes with a trough-shaped mixing chamber and sigma-shaped paddles mounted on the shaft, providing both sealing and mixing capabilities. Perfect for blending powders, granules and small amounts of liquid.
- Input:
- Powders, Granules, Small Amounts of Liquid
- Type:
- Dry Mixing, Mild Wet Mixing
Misturador de Relha de Arado LDH
Categorias: Misturador, Misturador Horizontal
Great for Processing Materials That Require Breaking Down:
The Ploughshare Mixer consists of a transmission system, a cylinder, ploughshares and flying blades. The ploughshares promote movement along the cylinder wall while high-speed flying blades disperse materials efficiently, ensuring quick and even mixing.
- Input:
- Powders, Granules, Small amounts of liquids
- Type:
- Dry Mixing, Mild Wet Mixing
- Additional Feature:
- Mild Crushing
WLDH-Misturador de Fita Horizontal
Categorias: Misturador, Misturador Horizontal, Misturador de Fita
Equipped with Horizontal Screw Belts:
The Horizontal Ribbon Mixer offers efficient material blending. Its cylinder holds a shaft with surrounding ribbon belts that rotate at equal speed: the outer belts move material from both ends toward the center while the inner belts move it from the center back out, folding the batch together for thorough mixing.
- Input:
- Powders, Granules, Small amounts of liquid
- Type:
- Dry Mixing, Mild Wet Mixing
DLH-Misturador Cônico de Rosca em Fita
Categorias: Misturador, Misturador Cônico, Misturador de Fita, Misturador de Rosca
Equipped with Rotating Spiral Belt:
A screw encased in a ribbon rotates simultaneously to create a swirling motion, lifting material upward in a spiral from the base of the cone before it descends by gravity. Optional features such as spray atomization and jacket heating or cooling are also available.
- Input:
- Solids, Powders, Granules, Liquids
- Type:
- Dry Mixing, Wet Mixing
- Additional Features:
- Humidifying, Drying, Cooling
Granulador Oscilante YK
Categorias: Granulador e extrusora
Efficient, Versatile Oscillating Granulator:
The Oscillating Granulator uses a special back-and-forth motion to softly turn moist powder into even, round granules. Variable oscillation frequency and amplitude allow precise control of particle size and density, in a compact design with simple operation and low maintenance requirements.
- Input:
- Moist powder mixed with a binder
- Output:
- Wet cylindrical granules
- Type:
- Dry Granulation, Wet Granulation
- Additional Feature:
- Mixing
Granulador de Cesto ZLB
Categorias: Granulador e extrusora
Efficient Wet Extrusion Granulator:
Moist powder is pushed through a mesh by rotating blades during extrusion to form quality granules. The Basket Granulator offers steady granulation rates, visually appealing particles, an automated discharge process and high output levels.
- Input:
- Moist powder mixed with a binder
- Output:
- Wet cylindrical granules
- Type:
- Extrusion Granulation, Wet Granulation
- Additional Feature:
- Mixing
Granulador de Compressão a Seco GKDH
Categorias: Granulador e extrusora
Additive-Free Dry Granulation Process:
Dry raw materials are compressed under pressure to form solid flakes, which are then processed into granules of the desired size — forming granules through pressure alone, with no liquid binder or added moisture.
- Input:
- Powder
- Output:
- Solid Granules
- Type:
- Dry Granulation
- Additional Features:
- Crushing, Screening
ZYG-Secador de Disco Horizontal a Vácuo
Categorias: Secador de condução e vácuo
Vacuum Conduction Dryer with Hollow Disc Stirrers:
The Vacuum Horizontal Disc Dryer has a large-area jacket for heating and hollow disc stirrers that enhance the heating surface. It performs better than rake and paddle vacuum dryers in heating efficiency for many materials, is suited to low-temperature vacuum operation, and is ideal for handling flammable, explosive, organic-solvent-based and heat-sensitive materials.
- Input:
- Liquids, Slurries, Pastes, and Mashes
- Output:
- Powder with 3%–10% moisture content
- Temperature:
- Heat source temperature 50°C to 200°C
- Additional Feature:
- Stirring, Mild Crushing
Liofilizador de Câmara
Categorias: Liofilizador, Liofilizador Industrial
State-of-the-Art Cabinet Freeze Dryer for Industrial Use:
This Cabinet Freeze Dryer is crafted to extract moisture efficiently from a wide array of products. Using a freeze-drying technique, it lowers temperatures to optimal levels and converts moisture directly from solid to vapor — ensuring top-notch preservation and quality without a liquid phase.
- Input:
- Pharmaceutical ingredients, food products, chemical compounds
- Output:
- Stably dried and preserved materials
- Temperature:
- -50°C to -80°C
Equipamentos que Abrangem Toda a Cadeia de Processos Químicos
Os secadores a vácuo processam intermediários químicos sensíveis a solventes e ao calor; os secadores de convecção e de leito fluidizado processam pós a granel em grande escala; os misturadores homogeneízam formulações químicas, de pós de fácil escoamento a pastas viscosas; os pulverizadores e granuladores controlam o tamanho de partícula em ambas as extremidades do processo.
Necessidades Comuns de Processamento Químico Atendidas por Esta Linha
Secagem à prova de explosão e em circulação fechada para solventes orgânicos e materiais inflamáveis. Opções construtivas resistentes à corrosão para alimentações químicas agressivas. Mistura de alto cisalhamento para pastas viscosas, além de mistura suave para pós de fácil escoamento. Redução de tamanho, da trituração grosseira à pulverização fina em nível micrométrico.
Explorar mais
Pharmaceuticals →
Um setor intimamente relacionado, com necessidades de secagem e granulação semelhantes.
Spices and Flavorings →
Compartilha equipamentos de extração e processamento em leito fluidizado com o processamento químico.
Animal Feed and Pet Food →
Compartilha equipamentos de granulação e mistura utilizados na formulação química.
